Bedienungsanleitung Hotpoint-Ariston FB 21.2 HA (Seite 19 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

468890

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

The electronic cooking

programmer

This feature allows you to program the oven or the grill

as follows:

 delayed cooking time for a specified period;

 immediate start for a specified period;

 timer.

Button Functions:

: Timer with hours and minutes;

: cooking time;

: end cooking time;

((

(

: Manual change;

))

)

: set cooking time (to count down);

: set cooking time (to start from zero)

How to reset the digital clock

After the appliance has been connected to the power

supply, or after a power cut, the clock display will

automatically reset to 0:00 and begin to blink.

 Press the

$ and

% buttons consecutively and then

reset the time (within 4 seconds) using the

))

) and

* buttons.

The button

* advances the hours.

The button

))

) decreases the hours.

The time can also be changed in the following two ways:

1. Repeat all of the steps above.

2. Press the

((

( button, and then use the

))

) and

* buttons

to reset the time.

Manual operation of the oven

Once the time has been set, the programmer

automatically switches to manual mode.

Note:Note:

Note: Press the

((

( button to restore the manual mode

after every Automatic cooking session.

Delayed cooking time for a specified period

The total cooking time as well as the time at which the

cooking will finish must be set. If we assume that the

time display reads10:00:

1. Turn the oven control knob to the setting and tempera-

ture desired (example: static oven mode at 200°C).

2. Press the button

$ and then set the cooking time

(within four seconds) using the

))

) and

* buttons.

Supposing the cooking time is set to 30 minutes, the

display will read as follows:

Release the button, and within 4 seconds, the current time

will reappear with the

m symbol along with the word

autoauto

auto

3. Press the button

% and then use the

))

) and

* buttons

to set the time for when the cooking program should

end. Let us imagine this time to be 1:00 p.m.

4. After the button has been released, the current time

will be displayed after approximately 4 seconds:

When

autoauto

auto is on, it indicates that the length of

cooking time and the time it is due to finish have been

programmed in automatic mode. At this point, the

oven will turn on automatically at 12:30 and turn off

after 30 minutes. When the oven is turned on, the

symbol m will be displayed for the entire cooking time.

The cooking duration can be displayed at any time by

pressing the button

$ , and the time it is due to finish

may be displayed by pressing the button

% .

Once cooking is completed, the timer will ring; to turn

it off, simply press any button except the ) and *

buttons.

Immediate start for a specified period

By programming just the duration (points 1 and 2 of the

Delayed cooking time for specified period section),

cooking will begin immediately.

To cancel a cooking schedule already programmed

Press the

$ button, and use the

))

) button to set the time

to:

then press the manual cooking mode button

((

Timer FeatureTimer Feature

Timer Feature

The timer feature allows you to enter a specific amount

of time and begins to count down. This feature does not

turn the oven on or off; it merely sounds when the time

has elapsed.

When the button





has been pressed, the display will

read as follows:

Then use the

* and

))

) buttons to set the desired time.

As soon as the button has been released, the timer will

start to count down and the current time will be displayed.

After the time has expired, an audible signal will be

emitted, which can be turned off by pressing any button

(except the

* and

))

) buttons). At this point the symbol

H will also turn off.

Correction/Cancellation of data

 The data entered can be changed at any time by

pressing the corresponding button and the

* or

))

)

buttons.

 When the data for the cooking duration is cancelled,

the data for the time cooking is due to end is also

cancelled automatically, and vice versa.

 If the oven has already been programmed, it will not

accept times for the end of cooking which are before

the start of the programmed cooking process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston FB 21.2 HA Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info