Bedienungsanleitung Hotpoint-Ariston FMD 963 (Seite 8 von 48) (Deutsch, Englisch, Holländisch, Französisch)

591474

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the On/Off

button ; the text POWER ON will appear on the

display and the START/PAUSE indicator light will flash

slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Open the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in “Detergents

and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the WASH

CYCLE SELECTOR buttons to select the required wash

cycle; the name of the wash cycle will appear on the

display. A temperature and spin speed is set for each

wash cycle; these may be adjusted. The duration of the

cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin speed.

The machine automatically selects the maximum

temperature and spin speed set for the selected wash

cycle; these values cannot therefore be increased.

The temperature can be decreased by pressing the

button, until the cold wash “OFF” setting is reached.

The spin speed may be progressively reduced by

pressing the button, until it is completely excluded

(the “OFF” setting). If these buttons are pressed again,

the maximum values are restored.

! Exception: if the 2 (60°)

(1st press of the button)

programme

is selected, the temperature can be increased up to a

value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the symbol lights up on the

display. To remove the delayed start function press the

button until the text “OFF” appears on the display.

Set the desired wash intensity.

Option makes it possible to optimise washing based

on the level of soil in the fabrics and on desired wash

cycle intensity.

Select the wash programme: the cycle will be

automatically set to “Normal” as optimised for garments

with an average level of soil (this setting is not applicable to

the “Wool” cycle, which is automatically set to “Delicate”).

For heavily-soiled garments press button until the

“Super Wash” level is reached. This level ensures a

high-performance wash due to a larger quantity of

water used in the initial phase of the cycle and due to

increased drum rotation. It is useful when removing the

most stubborn stains.

It can be used with or without bleach. If you wish to

bleach the items insert the additional compartment

(4) into compartment 1. When pouring the bleach, be

careful not to exceed the “max” level marked on the

central pivot (see figure pag. 10).

For lightly-soiled garments or a more delicate treatment

of the fabrics, press button until the “Delicate” level

is reached.

The cycle will reduce the drum rotation to ensure

washing results are perfect for delicate garments.

Set the rinse type.

Option makes it possible to select the desired rinse

type for sensitive skin. Press the button once for the “Extra

Rinse” level, which makes it possible to select an additional

rinse after the standard cycle rinse and remove all traces

of detergent. Press the button again for the “Sensitive

Skin” level, which makes it possible to select two additional

rinses to the standard cycle rinses; it is recommended for

very sensitive skin. When the button is pressed for the third

time, the “Anti allergy Rinse” level is set, thus allowing

the selection of 3 rinses in addition to the standard cycle’s

rinses. The option - started with cycles at a temperature of

40°C - makes it possible to remove major allergens such

as pollen, cat and dog hair. With cycles at a temperature

higher than 40° a very good level of antiallergic protection is

achieved. Press the button again to go back to the “Normal

Rinse” rinse type. If the current adjustment can be neither

set nor changed, the display will show “Not allowed”.

Modifying the cycle settings.

• Press the button to enable the function; the indicator

light corresponding to the button will switch on.

• Press the button again to disable the function; the

indicator light will switch off.

! If the selected function is not compatible with the

programmed wash cycle, the indicator light will flash

and the function will not be activated.

! If the selected function is not compatible with

another function which has been selected previously,

the indicator light corresponding to the first function

selected will flash and only the second function will

be activated; the indicator light corresponding to the

enabled function will remain lit.

! The functions may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/PAUSE

button. The corresponding indicator light will become

green, remaining lit in a fixed manner, and the door will be

locked (the DOOR LOCKED symbol will be on). During

the wash cycle, the name of the phase in progress will

appear on the display. To change a wash cycle while

it is in progress, pause the washing machine using the

START/PAUSE button (the START/PAUSE indicator light

will flash slowly in an orange colour); then select the

desired cycle and press the START/PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened. Press

the START/PAUSE button again to restart the wash cycle

from the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text “END OF CYCLE” on the display;

when the DOOR LOCKED symbol switches off

the door may be opened. Open the door, unload the

laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the button. The cycle will be stopped

and the machine will switch off.

Hotpoint-Ariston FMD 963 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info