Bedienungsanleitung Hotpoint-Ariston krc 741 dz (Seite 34 von 68) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

336062

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Using multiple programmes and the display

If one or more hotplates are programmed, the

display will show the data for the hotplate with the

least time remaining, and the light corresponding to

the position of the hotplate will be switched on. The

lights corresponding to the other hotplates

programmed will flash.

To display the time remaining for the other

programmed hotplates, press the

button

repeatedly. The times remaining for each hotplate

will be shown in a clockwise order, beginning with

the front left hotplate.

Changing the programme

1. Press the

button repeatedly until the duration

you wish to change is shown.

2. Use the

buttons to set the new duration.

3. Confirm by pressing the

button.

To cancel a programme, follow the above

instructions. At step 2, press the

- button: the

duration decreases progressively until it reaches 0

and switches off. The programme resets and the

display exits programming mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99

minutes.

1. Press the

programming button until the timer

indicator light is illuminated.

2. Set the desired duration using the

- and +

buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When

the time has elapsed, a buzzer will sound (for one

minute).

Control panel lock

When the hob is switched on, it is possible to lock

the oven controls in order to avoid accidental

changes being made to the settings (by children,

during cleaning, etc.). Press the

button to lock

the control panel: the indicator light above the button

will switch on.

To use any of the controls (e.g. to stop cooking),

you must switch off this function. Press the

button for a few moments, the indicator light will

switch off and the lock function will be removed.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob

is switched on again. In order to switch the hob on

again, you must first remove the lock function.

Demo mode

It is possible to set the hob to a demonstration

mode where all the controls work normally but the

heating elements do not switch on. To activate the

demo mode the hob must be switched on, with all

the hotplates switched off.

 Press and hold the

+ and - buttons

simultaneously for 6 seconds. When the 6

seconds have elapsed, the ON/OFF and

CONTROLS LOCKED indicator lights will flash for

one second. Release the

+ and - buttons and

press the

button;

 The display will show the text DE and MO and the

hob will be switched off.

 When the hob is switched on again it will be set to

the demo mode.

To exit this mode, follow the procedure described

above. The display will show the text DE and OF

and the hob will be switched off. When it is next

switched on, the hob will function normally.

Practical advice on using the appliance

 Use cookware made from materials which are

compatible with the induction principle

(ferromagnetic material). We especially recommend

pans made from: cast iron, coated steel or special

stainless steel adapted for induction. Use a magnet

to test the compatibility of the cookware.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston krc 741 dz Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info