Bedienungsanleitung Hotpoint-Ariston LFB 5B019 (Seite 20 von 28) (Englisch, Italienisch)

570819

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Refined Salt and Rinse Aid

(°dH=hardnessmeasuredinGermandegrees-°f=hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)

Measuring out the rinse aid

RinseaidmakesdishDRYINGeasier.Therinseaiddispenser

should be filled:

• WhentheLOWRINSEAIDindicatorlightonthepanel/display

is lit *;

• Whenthedarkopticalindicator* on the dispenser door “D”

becomes transparent.

1. Open the dispenser “D” by pressing and pulling up the tab

on the lid;

2.Carefully introducethe rinseaidasfar asthe maximum

reference notch in the filling space - avoid spilling it. If this

happens, clean the spill immediately with a dry cloth.

3.Presstheliddownuntilyouhearaclicktocloseit.

NEVER pour the rinse aid directly into the tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

may want to adjust the quantity of rinse aid used.

•SwitchthedishwasheronusingtheOn/Offbutton.

•SwitchitoffusingtheOn/Offbutton

•PresstheSTART/PAUSEbutton three times

•SwitchitonusingtheOn/Offbutton

•Everythingisoff

•Settheknobtothelevelnumberofrinseaidquantitytobe

supplied.

•SwitchitoffusingtheOn/Offbutton

•Settingiscomplete!

IftherinseaidlevelissettoZERO(ECO),norinseaidwillbe

supplied.TheLOWRINSEAIDindicatorlightwillnotbelitifyou

run out of rinse aid.

Amaximumof4levelscanbesetaccordingtothedishwasher

model. The factory setting is for a medium level.

• Ifyouseebluishstreaksonthedishes,setalownumber(1-2).

• Iftherearedropsofwaterorlimescalemarksonthedishes,

setahighnumber(3-4).

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard

or very hard.

(Followtheinstructionsgivenonthepackaging.)

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID* indicator lights will remain lit.

Measuring out the refined salt

Theuse ofsalt preventsthe formationof LIMESCALEonthe

dishes and on the machine’s functional components.

•Itisimportantthatthesaltdispenserbeneverempty.

•Itisimportanttosetthewaterhardness.

The salt dispenser is located in the lower part of the dishwasher

(seeDescription)

and should be filled:

• WhentheLOWRINSEAIDindicatorlightinthecontrolpanel

is lit*;

• Whenthegreenfloat* on the cap of the salt dispenser is no

longer visible.

• Seeautonomyinthewaterhardnesstable.

1.Remove thelower rackandunscrew the

containercap(anticlockwise).

2. Only the first time you do this: fill the water

dispenser up to the edge.

3.Positionthefunnel

(seefigure)

and fill the salt

containerrightuptoitsedge(approximately1

kg); it is not unusual for a little water to leak out.

4.Removethefunnelandwipeanysaltresidueawayfromthe

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Make sure the cap is screwed on tightly, so that no detergent can

getintothecontainerduringthewashcycle(thiscoulddamage

the water softener beyond repair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

•SwitchthedishwasheronusingtheOn/Offbutton.

•SwitchitoffusingtheOn/Offbutton

•HolddowntheSTART/PAUSEbutton for 5 seconds.

•SwitchitonusingtheOn/Offbutton

•Thesaltindicatorlightflashes(asmanytimesasthecurrent

selection.)

•Settheknob to the desired hardness level number

(seeTable

on water hardness.)

•SwitchitoffusingtheOn/Offbutton

•Settingiscomplete!

Evenifusingmulti-functionaltablets,thesaltdispensershould

still be filled.

Water Hardness Table

Average autonomy

salt dispenser with 1

wash cycle per day

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1.1 - 2 5 months

3 12 - 17 21 - 30 2.1 - 3 3 months

4 17 - 34 31 - 60 3.1 - 6 2 months

34 - 50 61 - 90 6.1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use

of salt. A setting of 5 may increase cycle duration.

* Only available in selected models.

Hotpoint-Ariston LFB 5B019 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info