Bedienungsanleitung Hotpoint-Ariston LFD 11M132 (Seite 19 von 84) (Deutsch, Französisch)

570818

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Anti-condensation strip*

After installing the dishwasher, open the door and stick the

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before

running the first wash cycle, completely fill the salt dispenser

with water and add only then approximately 1 kg of salt

(see chapter entitled Rinse aid and refined salt)

. The water

may overflow: this is normal and is not a cause for concern.

Select the water hardness value

(see chapter entitled Rinse

aid and refined salt).

- After the salt has been poured into

themachine,theLOWSALTindicatorlight* switches off.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 14 standard place-settings

Water supply

pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply

voltage

See appliance data plate

Total absorbed

power

See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

* Only available in selected models.

The control panel features a “Touch Control” system;

press the symbols lightly with your fingertips to activate

the command.

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Switching the appliance on for the first time

Selecting the language

SwitchonthemachineusingtheON/OFFbuttonandselectthe

desired language using the buttons next to the grey arrows

(the

default language is English.)

Press the OK button to confirm the selection.

Press the ESC button to exit or wait a few seconds.

SETTINGS button

This button makes it possible to select:

logodisplay,volumeofbuzzer/setoftones,language

selection, rinse aid adjustment, water hardness adjustment,

control panel lock.

Child safety lock

The control panel lock can be activated when the

dishwasher is switched on or when a cycle is in progress using

the “Lock” button. Press again to deactivate the function.

UsetheSETTINGS button to access themenu. The control

panellockcanbeactivatedautomaticallyafter10/30seconds

from the cycle start.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston LFD 11M132 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hotpoint-Ariston LFD 11M132

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info