Bedienungsanleitung Hotpoint-Ariston LI 671 A (Seite 21 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

75130

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

If the power socket

to which the

appliance is

connected is not

compatible with the

plug, replace it with

a suitable plug rather

than using adapters

or multiple plugs as

these could cause

overheating or

burns.

Installation and moving

After having bought or moved your dishwasher to another home, a correct installation

ensures that your dishwasher will operate smoothly and efficiently.

ments, use original spare parts

only.

Connect the cold water supply

hose to a 3/4 gas threaded

connection, taking care to

screw it tightly onto the tap. If

the water hoses are new or have

been out of use for an extended

period of time, let the water run

to make sure it is clear and free

of impurities before making the

connection. If this precaution is

not taken, the water inlet could

get blocked, causing damage to

your dishwasher.

Hot water connection.

Your dishwasher can be

supplied with hot water from

the mains supply (if you have a

central heating system with

radiators) at a temperature of

no more than 60°C.

In this case, the wash cycle time

will be about 15 minutes

shorter and the wash will be

slightly less effective.

The connection must be made

to hot water supply following

the same procedures as those

indicated for the cold water

connection.

Anti-flooding

protection

Your dishwasher is provided

with a special system which

blocks the water supply in the

event of leaks inside the

appliance. It is further equipped

with a water inlet hose that can

withstand extremely high

pressures and that turns bright

red in the event of breakage.

Safety in the event of flooding

is ensured by the second clear

hose that contains the former

and thus highlights the latter

when it has turned bright red.

It is vital that you check it on a

regular basis: if you see it has

turned bright red, then you

know you have to replace it as

soon as possible. Call for an

authorised technical engineer

to come and replace it.

Drain hose connection.

Fit the drain pipe into a drain

line with a minimum diameter

of 4 cm or place it over the sink.

Avoid restricting or bending it. The

part of the pipe marked with the

letter A should be between 40 and

100 cm above the ground.

The pipe should not be immersed

in water.

Choose where you want to

install your dishwasher, you

can even place it so that its

sides or back panel are side by

side with furniture or up against

the wall. The dishwasher is

provided with water supply and

drain hoses, which can be

directed towards the left or

right to facilitate appropriate

installation.

Levelling.

Once the appliance is

positioned, adjust the feet by

screwing them in or out

depending on how high you

want it and to level it so that it

is horizontal. Make sure that it

is not inclined more than 2

degrees. If the appliance is

level, it will help ensure its

correct operation.

Adjusting the back Feet

Insert the appliance into the

cutout and then adjust the

height using the screws located

on the front bottom part of the

machine. Use a screwdriver to

turn the screws in the

clockwise or anti-clockwise

direction to increase or

decrease the height

respectively.

Cold water connection.

This electric household

appliance should be connected

to the water mains using the

cold water supply hose

provided with the appliance

only. Do not use a different

hose. In the event of replace-

Your dishwasher has arrived

Electrical connection.

First of all, check that the mains

voltage and frequency values

correspond to those stated on

the rating plate located on the

stainless steel inner door of the

appliance and that the electrical

system to which the

dishwasher is connected is

sized for the maximum current

indicated on said rating plate.

The plug

The dishwasher plug must be

accessible even when the appliance

is installed as a built-in unit so that

maintenance can be done safely.

Earth: indispensable

safety.

Only now can you plug the

appliance into a socket

provided with an efficient earth

connection (the system's earthing

is a guarantee of safety provided

for by law, make sure your system

has it).

Power supply wire.

Check the power supply wire on a

regular basis; if it is damaged, we

recommend you have it replaced

by an authorised technical

Assistance service centre.

Condensation-proof tape.

On some models, a transparent

condensation-proof adhesive tape

has been provided.

It should be stuck onto the lower

side of your wooden worktop to

protect it from the formation of

condensation.

When not provided, this tape can

be requested as a spare part from

authorised retailers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston LI 671 A Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info