Bedienungsanleitung Hotpoint-Ariston LI 671 A (Seite 22 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

75130

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

Safety within your home

Your dishwasher was built in accordance with the strictest international safety regulations. They protect you and your family.

Read the instructions and information contained in this manual: they will provide you with useful hints as to installation, use and

maintenance safety. To avoid nasty surprises.

1. Dispose of the packaging

material carefully (follow the

instructions on how to divide

your rubbish up provided by

your local Council)

2. After removing the

packaging, check to make

sure your appliance is intact.

If in doubt, contact a qualified

professional.

3. Your dishwasher must only be

used by adults and for washing

household dishes, according to

the instructions included in

this manual. Do not touch the

appliance with wet hands or

feet or barefoot.

4. We discourage the use of

extension leads and multiple

plugs. If the electricity supply

wire is not long enough, then

have it replaced with one of

the correct length and

remember that it should be

free of bends or dangerous

kinks.

5. If the appliance is not operating

properly or if maintenance

operations are necessary,

disconnect the dishwasher

from the mains power supply

(unplug it!).

6. Keep children away from the

dishwasher when it is open and

keep detergents out of their

reach.

7. Your dishwasher is not to be

installed outdoors, not even if

the area is covered by a roof:

it is extremely dangerous to

leave it exposed to rain and

thunderstorms.

8. Do not touch the heating

element during or straight

after a wash cycle.

9. Do not lean or sit on the door

when it is open, as this could

overturn the dishwasher.

10. If the appliance malfunctions,

turn off the water inlet tap and

disconnect the plug from the

wall socket. Then try

consulting the section entitled

"I you have a problem, read

this". If you cannot resolve the

problem, then call the service

centre.

If you have a problem, read this

Your dishwasher may not work or not function properly. In many cases, these are problems which can be solved without having to call for

a technician. Before calling the service centre, always check the points below.

The dishwasher won't

start

■ Is the water supply tap

turned on?

■ Is the water supply tap

connected to the hose

properly?

■ Has the water in your home

been cut off?

■ Is the pressure of the water

supply sufficient?

■ Is the hose bent?

■ Is the filter on the water

supply hose blocked?

■ Is the dishwasher door

open?

The dishes are not

clean.

■ Have you put the right

amount of detergent into the

dispenser?

■ Is the wash cycle suitable for

the dishes you have placed

inside the appliance?

■ Are the filter and microfilter

clean?

■ Can the sprayer arms turn

freely?

Never call upon the

services of

unauthorised

technicians and

always refuse spare

parts that are not

originals.

The dishwasher won't

drain.

■ Is the drain hose bent?

Limescale deposits or

a white film form on

the dishes.

■ Is the lid on the salt

container closed properly?

■ Is the rinse aid dosage

correct?

Error messages.

Your dishwasher is equipped

with a safety system which is

able to detect any operating

anomalies. These anomalies

are reported by one or two

wash cycle indicator lights "M"

flashing rapidly.

Take a note of which lights are

flashing, turn the appliance off

and call for technical assist-

ance.

Tap off alarm

If you have forgotten to turn the

water tap on, your appliance will

remind you of this by sounding a

few short beeps for a few minutes.

Turn the tap on and your appliance

will start up again after a few

minutes. Were you to be absent

when these beeps are sounded, the

appliance will be blocked automati-

cally and indicator lights 5 and 6

(Rapid and crystal) will flash

rapidly. Turn the appliance off at

the ON-OFF button, turn on the

water tap and wait approximately

20 seconds before turning the

appliance back on. Re-select a

wash cycle as indicated in the

"Selecting the wash cycle"

paragraph and the appliance will

start.

Clogged filter alarm

If the appliance is blocked and

indicator lights 4 (eco) and 6

(crystal) flash rapidly, this means

the filter is clogged by large

particles of food residue. Turn the

appliance off, clean the filter

thoroughly and reposition it in its

seat as illustrated on page 21. Then

turn it back on and re-select a wash

cycle.

Troubleshooting

Water load solenoid valve

malfunction alarm.

If indicator light 5 (Rapid) flashes

rapidly, TURN the dishwasher OFF

AND BACK ON AGAIN after one

minute. If the alarm persists, first

turn off the water tap to avoid any

flooding and then cut off the

electricity supply and call for

technical assistance.

You have checked

everything, but the

dishwasher still

doesn't work and the

problem persists?

Call an authorised service centre

near you and remember to mention:

 the type of malfunction

 the model mark (Mod.) and the

serial number (S/N.) indicated on

the rating plate located on the inner

door, to one side.

I only want an authorised

specialised technician with

original Ariston guaranteed spare

parts

11. Once taken out of use,

appliances must be made

inoperable: cut the power

supply wire and damage the

door lock.

Hotpoint-Ariston LI 671 A Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info