Bedienungsanleitung Hotpoint-Ariston LL 65 X FR (Seite 21 von 24) (Englisch, Französisch)

512984

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

Safety within your home

Your dishwasher was built in accordance with the strictest international safety regulations. They protect

you and your family. Read the instructions and information contained in this manual: they will provide

you with useful hints as to installation, use and maintenance safety. To avoid nasty surprises.

1. Dispose of the packaging

material carefully (follow the

instructions on how to divide

your rubbish up provided by

your local Council)

2. After removing the

packaging, check to make

sure your appliance is intact.

If in doubt, contact a qualified

professional.

3. Your dishwasher must only be

used by adults and for washing

household dishes, according to

the instructions included in

this manual. Do not touch the

appliance with wet hands or

feet or barefoot.

4. We discourage the use of

extension leads and multiple

plugs. If the electricity supply

wire is not long enough, then

have it replaced with one of

the correct length and

remember that it should be

free of bends or dangerous

kinks.

5. If the appliance is not operating

properly or if maintenance

operations are necessary,

disconnect the dishwasher

from the mains power supply

(unplug it!).

6. Keep children away from the

dishwasher when it is open and

keep detergents out of their

reach.

7. Your dishwasher is not to be

installed outdoors, not even if

the area is covered by a roof:

it is extremely dangerous to

leave it exposed to rain and

thunderstorms.

8. Do not touch the heating

element during or straight

after a wash cycle.

9. Do not lean or sit on the door

when it is open, as this could

overturn the dishwasher.

10. If the appliance malfunctions,

turn off the water inlet tap and

disconnect the plug from the

wall socket. Then try

consulting the section entitled

"I you have a problem, read

this". If you cannot resolve the

problem, then call the service

centre.

If you have a problem, read this

Your dishwasher may not work or not function properly. In many cases, these are problems which can be

solved without having to call for a technician. Before calling the service centre, always check the points

below.

The dishwasher won't

start

■ Is the water supply tap

turned on?

■ Is the water supply tap

connected to the hose

properly?

■ Has the water in your home

been cut off?

■ Is the pressure of the water

supply sufficient?

■ Is the hose bent?

■ Is the filter on the water

supply hose blocked?

■ Is the dishwasher door open?

The dishes are not clean.

■ Have you put the right

amount of detergent into the

dispenser?

■ Is the wash cycle suitable for

the dishes you have placed

inside the appliance?

■ Are the filter and microfilter

clean?

■ Can the sprayer arms turn

freely?

The dishwasher won't

drain.

■ Is the drain hose bent?

Limescale deposits or a

white film form on the

dishes.

■ Is the lid on the salt

container closed properly?

■ Is the rinse aid dosage correct?

Error messages.

Your dishwasher is equipped

with a safety system which is

able to detect any operating

anomalies. These anomalies

are reported by one or two

wash cycle indicator lights "E"

flashing rapidly. Take a note of

which lights are flashing, turn

the appliance off and call for

technical assistance.

Tap off alarm

If you have forgotten to turn the

water tap on, your appliance

will remind you of this by

sounding a few short beeps for

a few minutes. Turn the tap on and

your appliance will start up again

after a few minutes. Were you to

be absent when these beeps are

sounded, the appliance will be

blocked automatically and wash

cycle 4 and 5 indicator lights (quick

wash and soak) will flash rapidly.

Turn the appliance off at the ON-

OFF button, turn on the water tap

and wait approximately 20 seconds

before turning the appliance back

on, then repeat the programming

operations and start the appliance

by pressing the Start button.

Clogged filter alarm

If the appliance is blocked and

wash cycle 3 and 5 indicator

lights (eco and soak) flash

rapidly, this means the filter is

clogged by large particles of

food residue. Turn the

appliance off, clean the filter

thoroughly and reposition it in

its seat as illustrated on page 20.

Then turn the appliance back on.

Repeat the programming opera-

tions and start the dishwasher by

pressing the Start button.

Troubleshooting

Water load solenoid valve

malfunction alarm.

If indicator light 4 (Quick vash)

flashes rapidly, TURN the

dishwasher OFF AND BACK ON

AGAIN after one minute. If the

alarm persists, first turn off the

water tap to avoid any flooding and

then cut off the electricity supply

and call for technical assistance.

You have checked

everything, but the

dishwasher still doesn't

work and the problem

persists?

Call an authorised service centre

near you and remember to mention:

 the type of malfunction

 the model mark (Mod.) and

the serial number (S/N.)

indicated on the rating plate

located on the inner door, to

one side.

Never call upon the

services of

unauthorised

technicians and always

refuse spare parts that

are not originals.

I only want an authorised

specialised technician with

original Ariston guaranteed spare

parts

11. Once taken out of use,

appliances must be made

inoperable: cut the power

supply wire and damage the

door lock.

Hotpoint-Ariston LL 65 X FR Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info