570618
4
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
25
GB
IInnssttaalllliinngg yyoouurr aapppplliiaannccee
BEFORE HOOK-UP
Warning:
Ensure that your appliance has not suffered
any damage during transport (deformed seal or
door, etc...). If you see any kind of damage,
before doing anything else, contact your retailer.
In order to easily locate the reference information
for your appliance, we recommend that you note
these data on the “After-Sales Service
Department and Customer Relations” page.
• ELECTRICAL CONNECTION
Ensure that:
- The electrical installation has sufficient voltage.
- The electrical wires are in good condition.
- The dia meter of the wires complies with the
installation requirements.
- Your electrical installation is equipped with 16-
ampere thermal-sensitive protection.
In case of doubt, consult your electrician-installer.
The electrical connections are made before the
appliance is installed in its housing.
Electrical safety must be provided by a correct
build-in. During installation and maintenance
operations, the appliance must be unplugged from
the electrical grid; fuses must be cut off or removed.
The oven must be connected with a power cable
(standar
dized) with three 1.5 mm2 conductors (1 ph
+ 1 N + ground) that must be connected to a
monophase 220-240 V network via a CEI 60083
standardised receptacle (1 ph + 1 N + ground lead)
or in accordance with installation rules. The safety
wir
e (green-yellow) is connected to the appliance’s
terminal and must be connected to the ground
lead of the electrical set-up.
In the case of connections with an electric
receptacle, it must remain accessible after
installation of the appliance.
The oven’s neutral conductor (blue wire) must be
connected to the network’s neutral conductor.
In your electrical installation, allow for a user-
accessible device that must be able to separate the
appliance from the main power supply and whose
contact opening is at least 3 mm above all the
terminals.
If the power cable is damaged, it should be
replaced by the manufacturer, its after-sales service
department or by a qua lified person to avoid
danger.
Warning:
We cannot be held responsible for any
accident resulting from an inexistent, defective
or incorrect ground lead.
If the oven malfunctions in any way, unplug the
appliance or remove the relevant fuse at the
oven’s connection lead-in.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hotpoint-Ariston MWH222I wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info