Bedienungsanleitung Hotpoint-Ariston WDF 740 (Seite 11 von 16) (Englisch)

665336

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Personalisation

Setting the temperature

By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash (

The washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value

set for each wash cycle.

Setting the drying cycle

The desired drying cycle type may be set by pressing the DRYING button once or several times. Two options are availa-

ble:

A - Based on time: from 40 to 180 minutes.

B - Based on the how damp the clothes are once they have been dried:

Iron dry

: slightly damp clothes, easy to iron.

Cupboard dry

: very dry clothes, recommended for towelling and bathrobes.

If your laundry load to be washed and dried is much greater than the maximum stated load (see Table of wash cycles),

perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in

the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remain-

der of the load.

N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.

Drying only

Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the

desired drying duration using the DRYING button.

Functions

The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note:

- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will

flash, a sound signal will be emitted and the function will not be activated..

- If a function which is incompatible with another function selected previously, only the most recent selection will

remain active.

Delay Start

To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed

(this may be between 1 hour and 24 hours).

To disable the function press the button until the text

is displayed.

N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.

Mini Load

This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum recom-

mended load (see Table of wash cycles).

Super Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle dura-

tion, this function offers a high-performance wash.

Slow Spin (1400-600)

By selecting this function, reduces the spin speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston WDF 740 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info