Bedienungsanleitung Hotpoint-Ariston WMAO 9437 (Seite 10 von 16) (Englisch)

665258

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the On/Off

button ; the text POWER ON will appear on the

display and the START/PAUSE indicator light will flash

slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Open the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in “Detergents

and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the

WASH CYCLE SELECTOR buttons to select the

required wash cycle; the name of the wash cycle will

appear on the display. A temperature and SPIN is

set for each wash cycle; these may be adjusted. The

duration of the cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or Spin.

The machine automatically selects the maximum

temperature and Spin set for the selected wash

cycle; these values cannot therefore be increased.

The temperature can be decreased by pressing the

TEMPERATURE button, until the cold wash “OFF”

setting is reached. The Spin may be progressively

reduced by pressing the SPIN button, until it is

completely excluded (the “OFF” setting). If these buttons

are pressed again, the maximum values are restored.

! Exception: if the 2 (60°) (1st press of the button) programme

is selected, the temperature can be increased up to a

value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the symbol lights up on the

display. To remove the delayed start function press the

button until the text “OFF” appears on the display.

Set the desired wash intensity.

Option “Cleaning Action” makes it possible to optimise

washing based on the level of soil in the fabrics and on

desired wash cycle intensity.

Select the wash programme: the cycle will be

automatically set to “Normal” as optimised for garments

with an average level of soil (this setting is not applicable to

the “Wool” cycle, which is automatically set to “Delicate”).

For heavily-soiled garments press button “Cleaning

Action” until the “Super Wash” level is reached. This

level ensures a high-performance wash due to a larger

quantity of water used in the initial phase of the cycle

and due to increased drum rotation. It is useful when

removing the most stubborn stains.

For lightly-soiled garments or a more delicate treatment

of the fabrics, press button “Cleaning Action” until the

“Delicate” level is reached. The cycle will reduce the

drum rotation to ensure washing results are perfect for

delicate garments.

Set the rinse type.

Option “Anti Allergy Rinse” makes it possible to select

the desired rinse type for sensitive skin. Press the

button once for the “Extra Rinse” level, which makes it

possible to select an additional rinse after the standard

cycle rinse and remove all traces of detergent. Press

the button again for the “Sensitive Skin” level, which

makes it possible to select two additional rinses to

the standard cycle rinses; it is recommended for very

sensitive skin. When the button is pressed for the third

time, the “Anti allergy Rinse” level is set, thus allowing

the selection of 3 rinses in addition to the standard

cycle’s rinses. The option - started with cycles at a

temperature of 40°C - makes it possible to remove

major allergens such as pollen, cat and dog hair. With

cycles at a temperature higher than 40° a very good

level of antiallergic protection is achieved. Press the

button again to go back to the “Normal Rinse” rinse

type. If the current adjustment can be neither set nor

changed, the display will show “Not allowed”.

Modifying the cycle settings.

• Press the button to enable the function; the indicator

light corresponding to the button will switch on.

• Press the button again to disable the function; the

indicator light will switch off.

! If the selected function is not compatible with the

programmed wash cycle, the indicator light will flash

and the function will not be activated.

! If the selected function is not compatible with

another function which has been selected previously,

the indicator light corresponding to the first function

selected will flash and only the second function will

be activated; the indicator light corresponding to the

enabled function will remain lit.

! The functions may affect the recommended load value

and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and the

door will be locked (the DOOR LOCKED symbol will be

on). During the wash cycle, the name of the phase in

progress will appear on the display. To change a wash

cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the START/PAUSE

indicator light will flash slowly in an orange colour);

then select the desired cycle and press the START/

PAUSE button again. To open the door while a cycle

is in progress, press the START/PAUSE button; if the

DOOR LOCKED symbol is switched off the door

may be opened. Press the START/PAUSE button again

to restart the wash cycle from the point at which it was

interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text “END OF CYCLE” on the display;

when the DOOR LOCKED symbol switches off

the door may be opened. Open the door, unload the

laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the button. The cycle will be stopped

and the machine will switch off.

Hotpoint-Ariston WMAO 9437 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info