Bedienungsanleitung Hotpoint DH93K S (Seite 11 von 44) (Englisch)

570609

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

The electronic programmer

DISPLAY

SET TIME

button

END OF

COOKING icon

CLOCK icon

DURATION

icon

TIMER icon

DECREASE TIME

button

INCREASE TIME

button

•• ••

! The Top Oven and Main Oven can be controlled by

the automatic timer. When the timer control has been

set for one oven, it is possible to use the other oven

only during the same automatic cooking programme.

! NEVER operate the grill when the ovens are set

to cook automatically because the oven cavity can

become warm and this may cause bacterial growth

in food.

Setting the clock

! The clock may be set when the oven is switched off or

when it is switched on, provided that a the end time of

a cooking cycle has not been programmed previously.

After the appliance has been connected to the mains,

or after a blackout, the

icon and the four numerical

digits on the DISPLAY will begin to flash.

1. Press the button several times until the icon

and the four digits on the display begin to flash.

2. Use the “+” and “-” buttons to adjust the time; if you

press and hold either button, the display will scroll

through the values more quickly, making it quicker and

easier to set the desired value.

3. Wait for 10 seconds or press the

button again to

finalise the setting.

Setting the minute minder

! This function does not interrupt cooking and does not

affect the oven; it is simply used to activate the buzzer

when the set amount of time has elapsed.

1. Press the button several times until the icon

and the three digits on the display begin to flash.

2. Use the “+” and “-” buttons to set the desired time; if

you press and hold either button, the display will scroll

through the values more quickly, making it quicker and

easier to set the value.

3. Wait for 10 seconds or press the

button again to

finalise the setting.

The display will then show the time as it counts down.

When this period of time has elapsed the buzzer will be

activated.

Programming cooking

! A cooking mode must be selected before

programming can take place.

Programming the cooking duration

1. Press the

button several times until the icon

and the three digits on the DISPLAY begin to flash.

2. Use the “+” and “-” buttons to set the desired

duration; if you press and hold either button, the

display will scroll through the values more quickly,

making it quicker and easier to set the value.

3. Wait for 10 seconds or press the

button again to

finalise the setting.

4. When the set time has elapsed, the text END

appears on the DISPLAY, the oven will stop cooking

and a buzzer sounds. Press any button to stop the

buzzer and turn all control knobs to 0 position.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

will stop automatically at 10:15 a.m.

Setting the end time for a cooking mode

! A cooking duration must be set before the cooking

end time can be scheduled.

1. Follow steps 1 to 3 to set the duration as detailed

above.

2. Next, press the

button until the icon and the

four digits on the DISPLAY begin to flash.

3. use the “+” and “-” buttons to adjust the cooking end

time; if you press and hold either button, the display

will scroll through the values more quickly, making it

quicker and easier to set the desired value.

4. Wait for 10 seconds or press the

button again to

finalise the setting.

5. When the set time has elapsed, the text END

appears on the DISPLAY, the oven will stop cooking

and a buzzer sounds.

Press any button to stop it.

Programming has been set when the

and

buttons are illuminated. The DISPLAY shows the

cooking end time and the cooking duration alternately.

• For example: It is 9:00 a.m. and a duration of 1

hour has been programmed. 12:30 is scheduled

as the end time. The programme will start

automatically at 11:30 a.m.

Cancelling a programme

To cancel a programme:

• press the

button until the icon corresponding to

the setting you wish to cancel and the digits on the

display are flashing. Press the “-” button until the

digits 00:00 appear on the display.

• Press and hold the “+” and “-” buttons; this

will cancel all the settings selected previously,

including timer settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint DH93K S Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info