FILLING THE RINSE AID CONTAINER...
The purpose of Rinse Aid is to prevent
formation of water marks on tableware and
utensils,and to ensure that glasses are clean
and sparkling.Rinse Aid is consumed during
the rinsing process.
- To open the lid,press on the
rinse aid (1) container lid and
simultaneously lift the lid off the lug (2).
- Pour the rinse aid into the filler hole
until the level indicator turns dark.
- Close the lid,ensuring that it has
snapped closed.
Important:
Only use rinse aids intended for use in
domestic dishwashers,
Adjusting the amount of Rinse Aid...
The amount of rinse aid added to the water
can be varied by adjusting the control.The
rinse aid control has been factory set at ‘3.5’.
This setting is recommended when Sun All
in One is being used.
Do not alter the setting of the rinse aid con-
trol unless streaks or water marks are left on
the dishes.
Streaks - Turn knob towards ‘-’.
Water Marks - Turn knob towards ‘+’.
Rinse aid control.
Low Rinse Aid Indicator...
As long as the rinse aid indicator on the dis-
penser is dark and the indicator on the con-
trol panel 5 is not lit,there is sufficient rinse
aid in the dishwasher.
LOW rinse aid indicator
12
1
2
