FILLING THE SPECIAL SALT
CONTAINER...
Note:
Only use recommended Dishwasher salt or
granular salt.DO NOT use everyday table
salt,cooking salt or road salt as they
contain insoluble substances which could
harm the Dishwasher.
How the salt works:
While washing is
taking place,salt is automatically rinsed out
of the salt container into the water softener
where it dissolves the lime in the water.The
dissolved lime is pumped out of the dish-
washer.The water softener system is then
ready for the next load.This process of
regeneration can only function when the
salt is dissolved in water.
● You should fill just before starting the
programme.
● Unscrew the lid of the salt container.
Before using the dishwasher for the
first time,pour approximately 1 litre of
water into the salt container.
● Use the supplied funnel to fill salt to the
top of the container (maximum of 1.5kg).
As you tip in the salt some of the water
is displaced and drains away.
When you have done this,clean off any
remnants of salt from the area around
the neck of the container. Replace the
lid,back onto the container, ensuring
that it is not cross-threaded.
The
LOW SALT Indicator
4 on the front
panel will light up initially but will
extinguish when the salt solution has
become sufficiently concentrated.
NOTE:
Models DWF35 and DWF34 only:
When the control is set to 0,it is
not necessary to add any salt, as
none will be consumed while the
dishwasher is operating.The LOW
SALT indicator is switched off.
If the control is set between 1and
7, then salt must be added.
Models DWF33 and DWF30 only:
If the control is set to 0 , it is not
necessary to add any salt, as none
is consumed while the dishwasher
is operating. If the switch is set
between 1 and 3 , then salt must
be added.
WARNING:
DO NOT pour detergent into the special
Salt Container.This will destroy the
water softener.
LOW SALT indicator
Add more salt as soon as the LOW SALT
indicator 4 on the front panel lights
up.
11
