Bedienungsanleitung Hotpoint HD Line IIDC60AA0 (Seite 11 von 12) (Englisch)

665375

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

1111

hotpoint.co.uk

TROUBLESHOOTING

Problem Possible causes / Solutions

• The plug may not be inserted into the electrical socket or it may not

make contact.

• Make sure that the temperature is not set to MIN.

• The temperature indicator light is on. This shows that the Compact

Generator is warming up. The indicator light will go off when the set

temperature is reached.

• Not enough water in the water reservoir. Fill up the water reservoir.

• The Compact Generator is not hot enough. Re-place the Compact

Generator in a horizontal position using its pad and wait until the

temperature indicator light goes off before starting to iron.

• The soleplate temperature may be too low because the shot-of-

steam button has been activated too frequently. Slightly increase the

time interval between the steam shots.

• There may be residues in the vaporisation chamber. Clean it

as shown in the chapter “Cleaning and maintenance” under the

paragraph “Descaling”.

• You are using perfume, vinegar, starch, scale-removing agents,

ironing products or other chemicals. Remember that these

substances may damage the product. Rinse the water reservoir.

• You are not using the correct water type (see chapter "Filling the

water reservoir").

• You are using starch. You can use starch directly on the reverse side

of the fabrics and in any case never in the water reservoir.

• The garment was not washed correctly or has some soap residues.

• Youareironinganewgarmentnotyetwashedforthersttime.

• The soleplate temperature may be too low because steam button

has been activated too frequently. Slightly increase the time interval

between steam shots.

• The soleplate temperature is set to a temperature that is too low.

• Youdidnotclosethelidofthellerholecorrectly.

• You used the shot-of-steam function and/or the steam function at a

temperature that was too low. We recommend using these functions

attemperatureshigherthan●●●.

• You are using perfume, vinegar, starch, scale-removing agents,

ironing products or other chemicals. Remember that these

substances may damage the product. Rinse the water reservoir.

• You are using a temperature that is too high. Clean the soleplate - see

chapter “Cleaning and maintenance” under paragraph “Cleaning”.

• You are using starch. You can use starch directly on the reverse side

of the fabrics and in any case never in the water reservoir.

• The garment was not washed correctly or has some soap residues.

• Youareironinganewgarmentnotyetwashedforthersttime.

The soleplate stays cold and

does not warm up.

The temperature indicator

light goes on and off.

Steam comes out in a

reduced quantity or does not

come out at all.

Impurities coming out of the

soleplate stain the garments.

Water is dripping out of the

soleplate.

The soleplate is dirty or dark

and may stain the fabrics.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint HD Line IIDC60AA0 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info