Bedienungsanleitung Hotpoint HIP4022 WGT - Ultima (Seite 5 von 12) (Englisch)

670821

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

TABLET DETERGENT (All-in-one)

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET DETERGENT button (the indicator light

will light up) if you use

All-in-one detergents

in tablet form

(rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option

should be off.

ZONE WASH

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and

detergent.

Select a compatible program (see “Programs table”),

and then press the ZONE WASH button: the symbol of the

chosen rack will appear on the display:

(only lower rack selected)

(only upper rack selected)

By default the appliance washes dishes in all racks.

Option is OFF.

ZONE WASH 3D

Thanks to the additional 3D water jets placed on the bottom of

the cavity, ZONE WASH 3D option allows to save energy or to

increase the washing performance of the dishwasher.

It is compatible with Normal and Intensive cycles, and it

works with one rack at once.

• 3D ZONE WASH + NORMAL CYCLE: it allows to reduce

energy consumption up to 40%.

• 3D ZONE WASH + INTENSIVE CYCLE: it increases the

washing performances up to 40%. Ideal for very soiled

mixed loads, e.g. pans and saucepans, dishes with

heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery).

How to activate the option:

1. Select a compatible cycle (Normal or Intensive)

2.Press 3D button to activate the option: a basket icon will

blink for a few seconds.

3.It is possible to change the selected rack pressing the

ZONE WASH button.

Remember to load the crockery in the selected rack

only.

WATER TAP CLOSED – Alarm

Flashes when there is no inlet water or water tap is closed.

TURBO

This option can be used to reduce the duration of the

main programs while maintaining the same washing and

drying performance levels.

Select a compatible program (see “Programs table”),

press the TURBO button and the indicator light will switch

on. To deselect the option, press the same button again.

EXTRA DRY

To improve the drying of the dishes, after selecting the

program, press the EXTRA DRY button and the indicator

light comes on.

A higher temperature during the final rinse and an extended

drying phase allow for improving drying. To deselect the

option, press the same button again. The EXTRA DRY option

results in the lengthening of the wash cycle.

START DELAY

The start of the program may be delayed for a period of

time between 0:30 and 24 hours.

1. Select the program and any desired options. Press the

DELAY button (repeatedly) to delay the start of the

program. Adjustable from 0:30 to 24 hours. When 24

hours is setting has been reached, press the START

DELAY another time to deactivate the START DELAY

function.

2. Press the START button and close the door within 4 sec.:

the timer will begin counting down;

3. Once this time has elapsed, the indicator light switches

off and the program begins automatically.

The START DELAY function cannot be set once a

program has been started.

LIGHT ON THE FRONT

A LED light projected on the floor indicates that the

dishwasher is working.

The light stays on during the cycle and switches off at the

end of the cycle.

If the delayed start was set, the light goes on for the entire

duration of the countdown.

This feature is active by default, but it is possible to

deactivate it in the “SETTINGS MENU”.

INTERNAL LIGHTS

When the feature is active the LEDs in the tub are

automatically switched on/off as soon as the user

open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in

the tub switch off (to turn them on again, the door has to be

closed and opened again).

This feature is active by default, but it is possible to

deactivate it in the “SETTINGS MENU”.

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps

will sound. The option will not be enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint HIP4022 WGT - Ultima Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info