Bedienungsanleitung Hotpoint LFTA plus H204 (Seite 18 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

673253

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Start-up and use

Starting the dishwasher

1. Turn the water tap on.

2. Open the door and press the ON/OFF button: you will hear a

short beep and the display and option indicator lights switch on.

3. Measure out the detergent (

see below

4. Load the racks (

see Loading the racks

5. Select the wash cycle in accordance with the type of crockery

and its soil level (

see Table of wash cycles

), by pressing the P

button.

6. Select the wash options (

see adjacent information

7. Start the wash cycle by shutting the door: a long beep signals

the start of the wash cycle.

8. Two short beeps and one long one indicate the end of the

wash cycle and the wash cycle number flashes on the display.

Open the door, switch off the appliance by pressing the ON/OFF

button, shut off the water tap and unplug the appliance from the

electricity socket.

9. Wait for a few minutes before removing the crockery, in order

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

certain periods of inactivity, in order to minimise

electricity consumption.

AUTO WASH CYCLES*: this model of dishwasher is

equipped with a special sensor which can be used to assess the

level of soiling and automatically select the most efficient and

economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the

operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process

it is possible to change the cycle, provided that it has only just

begun: open the door, avoiding the escaping steam, and press

and hold the ON/OFF button; the machine will switch off with a

long beep. Switch the machine back on using the ON/OFF button

and select the new wash cycle and any options desired; start the

cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care to

avoid the escaping steam, and place the crockery inside the

dishwasher. Close the door: the cycle starts from the point at

which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been shut or once the electricity

supply is restored.

Measuring out the detergent

A good wash result also depends on the correct amount of

detergent being used; exceeding the stated amount does not

result in a more effective wash and increases environmental

pollution.

Only use detergent which has been specifically

designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam

residue remaining in the machine after the cycle

has ended.

The use of tablets is only recommended for

models which offer the MULTI-FUNCTIONAL

TABLETS option.

To achieve the best results from each washing

and drying cycle, powder detergent, rinse aid liquid

and salt should be used.

Compartment A: Washing detergent

Compartment B: Pre-wash detergent

1. Open cover C by pressing button

2. Pour in the detergent after

consulting the Table of wash cycles:

• For powder detergent use

compartments A and B.

• For detergent in tablet form: when

the cycle requires 1 tablet, place it

in compartment A and close the

cover; when it requires 2, place the

second tablet at the bottom of the appliance.

3. Remove detergent residues from the edges of the compartment

and close the cover until it clicks.

* Only available in selected models.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint LFTA plus H204 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info