Bedienungsanleitung Hotpoint MF IDC (Seite 5 von 8) (Englisch)

665377

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Heating or frothing the milk – Automatic

operation

1. Place the container on the base.

2. Remove the milk container’s lid.

3. Fit the appropriate whisk into the holder on the

bottom of the container.

4. Pour the desired amount of milk into the contai-

ner.

5. Fit the lid back onto the container.

6. Use the temperature knob to set the desired

temperature.

7. Insert the power plug into a suitable wall power

outlet. The main led will light up.

8. Press the ON button. The appliance will beep,

the led will start ashing and the frother cycle will

start.

9. When the milk reaches the set temperature, the

cycle automatically stops. If you set cold froth

mode with the knob, the cycle will stop auto-

matically after 60 seconds.

10. The appliance will beep three times when the

cycle terminates.

11. You can interrupt the cycle at any time by pres-

sing the start/stop button. The set temperature

will not be reached if you do so.

12. Once the cycle has terminated, remove the con-

tainer from the base and pour its contents into

a cup or mug. You can use a spoon to push the

froth out of the container, or simply shake the

container slightly while pouring.

13. You can now disconnect the plug from the wall

outlet.

Heating – Keep warm function

This function allows you to froth or heat the milk and

keep it hot at the set temperature. Follow steps 1 to 7

in the previous paragraph.

8. Hold down the start button for more than 2 se-

conds. The appliance will emit a long beep, the

led will start ashing and the frother will start

operating.

9. When the milk reaches its set temperature, the

appliance will stay on for a while before switching

off:

• 20 minutes for the 40°C cycle

• 10 minutes for the 65° and 85° cycles

10. You can interrupt the cycle at any time by pres-

sing the start/stop button.

11. Once the cycle has terminated, remove the con-

tainer from the base and pour its contents into

a cup or mug. You can use a spoon to push the

froth out of the container, or simply shake the

container slightly while pouring.

12. You can now disconnect the plug from the wall

outlet.

This feature is not suitable to keep warm the

milk froth and other drinks like hot chocolate.

FOR BEST RESULTS...

To get the best results, take the milk out of the refrige-

rator immediately before pouring it into the container.

• If you want a rich milky froth, rst run the cold

froth cycle and then a hot froth cycle.

• We recommended using full fat milk for all fro-

thed milk beverages, as it gives a richer froth.

FURTHER INFORMATION

• If the appliance has been left connected to the

power outlet for a long time after use, you must

press the start button twice to turn it on and then

start a cycle.

• Allow the appliance to cool down after using a

hot cycle; do not use it immediately for a second

cycle. Wait a few minutes between cycles.

• After a cold froth cycle, you can immediately

start a new heating or frothing cycle.

MAINTENANCE AND CLEANING

• Always pull the power plug out of the wall outlet

and wait for its motor to stop completely before

cleaning the appliance.

• To avoid the risk of electric shock, do not clean

the base or power cord with water, and never im-

merse them in water.

• The container, whisks and lid can be cleaned

with hot water and a mild detergent, or in the di-

shwasher.

• Take care to dry all parts thoroughly before using

them again.

• The heating base can be cleaned with a soft

damp cloth which has been dipped in a small

amount of detergent. Never immerse it in water

or clean it in a dishwasher.

• Do not use abrasive or aggressive detergents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint MF IDC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info