Bedienungsanleitung Hotpoint RPD 10477D (Seite 8 von 16) (Englisch)

650556

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Detergent dispenser drawer: used to dispense

detergents and washing additives (see “Detergents and

laundry”).

Programme Key: the Programme Key inside the deter-

gent dispenser shows all the available programmes toge-

ther with a graphical guide on how to use the individual

dispenser compartments.

ON/OFF button : press this briefly to switch the ma-

chine on or off. The START/PAUSE indicator light, which

flashes slowly in a green colour shows that the machine is

switched on. To switch off the washing machine during the

wash cycle, press and hold the button for approximately 3

seconds; if the button is pressed briefly or accidentally the

machine will not switch off. If the machine is switched off

during a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR KNOB: used to set the

desired wash cycle (see “Table of programmes and wash

cycles”).

FUNCTION buttons: press the button to select the

desired function. The corresponding indicator light on the

display will switch on.

AUTO CLEAN button: press to clean the machine’s inter-

nal parts (see “Cleaning the washing machine”).

DIRECT INJECTION button: press to select the DIRECT

INJECTION option.

MULTI RINSE button : press to select the desired

rinse type.

SPIN button : press to reduce or completely exclude

the spin cycle - the value is indicated on the display.

TEMPERATURE button : press to decrease the tempe-

rature: the value will be shown on the display.

KEY LOCK button : to activate the control panel

lock, press and hold the button for approximately 2

seconds. When the display visualises “KEY LOCK ON” the

control panel is locked (apart from the ON/OFF button).

This means it is possible to prevent wash cycles from

being modified accidentally, especially where there are

children in the home. To deactivate the control panel lock,

press and hold the button for approximately 2 seconds.

DELAY (DELAY TIMER) button : press to set a delayed

start time for the selected wash cycle. The delay time will

be shown on the display.

START/PAUSE button with indicator light: when the gre-

en indicator light flashes slowly, press the button to start a

wash cycle. Once the cycle has started the indicator light

will remain lit in a fixed manner. To pause the wash cycle,

press the button again; the indicator light will flash in an

orange colour. If the symbol is not illuminated, the door

may be opened. To start the wash cycle from the point at

which it was interrupted, press the button again.

Standby mode

This washing machine, in compliance with new energy sa-

ving regulations, is fitted with an automatic standby system

which is enabled after about 30 minutes if no activity is

detected. Press the ON-OFF button briefly and wait for the

machine to start up again.

Antimicrobial seal

The seal around the porthole door is made from a special

mixture ensuring antimicrobial protection, thus reducing

bacterial proliferation up to 99.99%.

The seal contains zinc pyrithione, a biocidal substance

which reduces the proliferation of harmful microbes (*)

such as batteries and mould prone to causing stains,

unpleasant odours and product deterioration.

(*) According to tests performed by the University of Perugia,

Italy on: Staphylococcus aureus, Escherichia coll, Pseudomonas

aeruginosa, Candida albicans, Aspergillus niger, Penicillium digitatum.

In rare cases an allergic reaction may be caused by prolonged contact between

seal and skin.

Description of the washing machine

Control panel

TEMPERATURE

button

Detergent dispenser drawer

FUNCTION

buttons

ON/OFF

button

SPIN

button

START/PAUSE

button with indicator light

KEY LOCK

button

DELAY

(DELAY

TIMER)

button

MULTI

RINSE

button

DISPLAY

AUTO

CLEAN

button

DIRECT

INJECTION

button

Programme

Key

WASH

CYCLE

SELECTOR

KNOB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint RPD 10477D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info