Bedienungsanleitung Hozelock 2212 Sensor Controller (Seite 5 von 68) (Alle Sprachen)

661665

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

How to set up the Sensor Controller - automatic

watering

Sunrise and Sunset is the best time to water your garden to avoid

evaporation and leaf scorch. The Daylight sensor automatically

adjusts the watering schedule to coincide with the changing time

for sunrise and sunset.

Cloudy or overcast mornings and evenings might cause a slight

delay to the watering times, but these are not significant to have

any adverse effects on your garden.

Rotate the control dial to select from the 3 marked sections –

Sunrise (once a day), Sunset (once a day) or Sunrise and Sunset

(twice a day). (See Fig. 5)

Choose from the required watering durations – 2, 5, 10, 20, 30 or

60 minutes of watering.

How to turn off the Sensor Controller

If you do not want the controller to automatically come on turn the

rotary dial to the “OFF” position. You can still use the

button to

manually water your garden.

Initial synchronisation period

When you install new batteries there is a 6 hour lockout period to

prevent the controller from watering while you are setting up your

system. After a 24 hour cycle of Sunrise and Sunset the controller

will be synchronised with the changing light levels. You can

manually water your garden using the

button during the 6 hour

lockout period.

Positioning your Sensor Controller outdoors

It is important that your water controller is in an outdoor location.

Do not point the control panel directly towards outdoor security

lights or other bright lights that come on during the night as

these might interfere with the recorded light levels and cause the

controller to come on at the wrong time.

Ideally, you should not set up your controller in a heavily shaded

passageway or behind buildings where light levels remain low

all day long. Do not position the controller inside buildings such

as garages or sheds where it will not receive natural daylight to

function correctly.

The controller is designed to be positioned directly underneath an

outdoor tap. Do not position the controller on its side or lying on the

ground whereby rainwater cannot flow away from the product.

1 hour delay

(when using 2 Sensor Controllers together)

If you install two Sensor Controllers you might want to stagger the

start times to prevent pressure loss when two appliances are used

simultaneously – for example sprinklers.

Remove the delay plug from the storage location on the back of

the control panel (Fig. 2) and fit the plug on the location below the

batteries.

With the plug inserted the one hour delay affects all automatic

watering. The delay period of one hour cannot be changed.

Manual operation (water now)

You can turn on the water controller at any time by pressing the

button once. Press again to turn off at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hozelock 2212 Sensor Controller Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info