Bedienungsanleitung HP 17-x020nd (Seite 34 von 68) (Englisch)

654149

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

4 Safety notices for desktops, thin clients,

and personal workstations

Important safety information

WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper

workstation setup, posture, and health and work habits for computer users, and provides important electrical

and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the

Documentation CD that is included with the product.

To reduce the risk of electric shock or damage to the equipment:

●

Plug the power cord into an AC outlet that is easily accessible at all times.

●

Disconnect power from the computer by unplugging the power cord from the AC outlet.

●

If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The

grounding pin is an important safety feature.

The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it.

Install the computer near an AC outlet. The AC power cord is your computer’s main AC disconnecting device

and must be easily accessible at all times. For your safety, the power cord provided with your computer has a

grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical

shock.

To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC

outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your

computer from the AC power outlet.

Always disconnect the modem cord from the telephone system before installing or removing your computer

cover.

Do not operate the computer with the cover removed.

For your safety, always unplug the computer from its power source and from any telecommunications

systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to

do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power

supply and modem of this product.

As a safety precaution, if the system power load exceeds the specic conguration’s capacities, the system

may temporarily disable some USB ports.

CAUTION: If your computer is provided with a voltage select switch for use in a 115 or 230 V power system,

the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/

region where it was initially sold. Changing the voltage select switch to the incorrect position can damage

your computer and void any implied warranty.

This product has not been evaluated for connection to an “IT” power system (an AC distribution system with

no direct connection to earth, according to IEC/EN 60950).

24 Chapter 4 Safety notices for desktops, thin clients, and personal workstations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP 17-x020nd Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP 17-x020nd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info