Bedienungsanleitung HP Aruba IAP-305 (Seite 4 von 11) (Englisch)

724191

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

4 Aruba 300 Series Wireless Access Point | Regulatory Compliance and Safety Information Guide

Reset Button

To reset the 300 Series access points to factory default settings, press and hold down the reset button using a small, narrow

object such as a paper clip while the (I)AP is powered on.

DC Power Socket

If PoE is not available, an optional Aruba AP-AC-12V30B power adapter kit (sold separately) can be used to power the 300

Series access points.

Additionally, a locally-sourced AC-to-DC adapter (or any DC source) can be used to power this device, as long as it complies

with all applicable local regulatory requirements and the DC interface meets the following specifications:

 12 Vdc (+/- 5%) and at least 18W

 Center-positive 2.1/5.5 mm circular plug, 9.5 mm length

Before You Begin

Pre-Installation Network Requirements

After WLAN planning is complete and the appropriate products and their placement have been determined, the Aruba

controller(s) must be installed and initial setup performed before the Aruba access points are deployed.

For initial setup of the controller, refer to the ArubaOS Quick Start Guide for the software version installed on your controller.

Pre-Installation Checklist

Before installing your 300 Series access points, ensure that you have the following:

 Cat5E or better UTP cable of required length

 One of the following power sources:

 IEEE 802.3af-compliant Power over Ethernet (PoE) source.

 Aruba AP-AC-12V30B power adapter kit (sold separately)

For AP-304 and AP-305 only:

 Aruba Controller provisioned on the network:

 Layer 2/3 network connectivity to your access point

 One of the following network services:

 Aruba Discovery Protocol (ADP)

 DNS server with an “A” record

FCC Statement: Improper termination of access points installed in the United States configured to non-US model controllers

will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a

requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80).

EU Statement:

Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the ArubaOS User Guide/Aruba Instant

User Guide for details on restrictions.

Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au

ArubaOS User Guide/Aruba Instant User Guide pour les details des restrictions.

Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich

Einschränkungen finden Sie im ArubaOS User Guide/Aruba Instant User Guide.

Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla ArubaOS User Guide/Aruba Instant User

Guide per avere informazioni detagliate sulle restrizioni.

The instructions for this section are applicable to the AP-304 and AP-305 only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Aruba IAP-305 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info