Bedienungsanleitung HP Color LaserJet Pro M452 (Seite 1 von 28) (Alle Sprachen)

682061

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Dansk ............. 15

Català ............. 13

Español ........... 11

Italiano ............. 9

Deutsch ............. 6

Français ............ 3

English .............. 1

Nederlands ...... 17

Norsk .............. 21

Suomi ............. 19

Svenska .......... 25

Português ....... 23

Windows

1. Do not connect the USB cable before installing the software. If

the cable is already connected, disconnect it before continuing.

The installation process prompts to connect the cable at the

appropriate time.

2. Continue with “5. Locate or download the software installation les”

NOTE: During software installation, select the option to Directly

connect this computer using a USB cable. (Windows only)

Mac

1. For Mac, connect the USB cable between the computer and the

printer before installing the software.

2. Continue with “5. Locate or download the software installation les”

Wired (Ethernet) network connection

Use a standard network cable. (Cable not included.)

1. Connect the network cable to the printer and to the network.

Waita few minutes for the printer to acquire a network address.

2. On the control panel, view the display while it is in the Ready

state. If an IP address is listed, the network connection has been

established. If not, wait a few more minutes and try again. Note

the IP address for use during software installation. Example IP

address: 192.168.0.1

To manually congure the IP address, see “Manually congure the

IP address”.

3. Continue with “5. Locate or download the software installation les”

NOTE: During software installation, select the option to Connect

through a network. (Windows only)

Color LaserJet Pro

M452nw, M452dn

Getting Started Guide

IMPORTANT:

Follow Steps 1 - 2 on the

printer hardware setup

poster, and then continue

with Step 3.

After turning on the printer, wait for it to initialize. To navigate the control panel, use the arrow

buttons and the OK button. Follow the prompts on the control panel to congure these settings:

• Language

• Location

• Default Settings

Under Default Settings select one of these options:

• Self-managed: Optimized default settings for most users that include guided setup

and conguration steps and automatic updates.

• IT-managed: Optimized default settings for eet manageability.

Settings are fully customizable after initial setup.

NOTE: Select Print Information Page to print a page that instructs how to change the

default settings.

www.hp.com/support/colorljM452 www.register.hp.com

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable (not included with all models).

Manually congure the IP address

See the printer user guide for information on how to manually congure

the IP address. See the “Troubleshooting” section of this guide.

Initial setup on the control panel

Select a connection method and prepare for software installation

Built-in wireless network connection (nw models)

Method 1

The recommended method for connecting the M452nw to a wireless network

is during the printer software installation process, as described in “5. Locate or

download the software installation les”.

Method 2 (push-button routers only)

Another method for connecting the printer to a wireless network is the push-

button method, described in the steps below.

1. Press the Wireless button.

2. Open the Wireless On/O menu.

3. Select On.

4. Return to the Wireless Menu and select Wi-Fi Protected Setup.

5. Select Pushbutton.

6. Within 2 minutes of selecting Pushbutton, at the wireless router or

access point, press the device discovery button to discover the printer.

7. Wait while the printer establishes a network connection.

8. View the control-panel display after it has returned to the Ready state. If

an IP address is listed, the network connection has been established. If

not, wait a few more minutes and try again. Notethe IP address for use

during software installation. Example IP address: 192.168.0.1

9. To print from a computer, continue with “5. Locate or download the

software installation les”. To print from a phone or tablet only, continue

with “7. Mobile and wireless printing”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Color LaserJet Pro M452 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Color LaserJet Pro M452

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info