Bedienungsanleitung HP Color LaserJet Pro MFP M274 (Seite 67 von 128) (Englisch)

626498

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Set up Scan to E-mail

Introduction

To use this scan feature, the product must be connected to a network. This scan feature is not available until

you configure it. To configure this features, use the Scan to Email Setup Wizard (Windows), which is installed

in the HP program group for the product as part of the full software installation. You can also use the

HP Embedded Web Server to configure this feature. The following instructions describe configuring the

feature by using both the Scan to Email Setup Wizard and the HP Embedded Web Server.

●

Use the Scan to E-Mail Wizard (Windows)

●

Set up the Scan to Email feature via the HP Embedded Web Server (Windows)

●

Set up the Scan to Email feature on a Mac

Use the Scan to E-Mail Wizard (Windows)

Some HP products include driver installation from a software CD. At the end of this installation is an option to

Setup Scan to Folder and Email. The setup wizards include the options for basic configuration.

After installation, access the setup wizard by clicking the Start button, selecting the Programs or All

Programs item, and then clicking the HP item. Click the product name item, and then click the Scan to E-mail

Wizard to start the configuration process.

1. To add a new outgoing email address, click the New button.

2. Enter the email address. Click the Next button.

3. In the Display Name box, type the name to display for this email address, and then click Next.

NOTE: To secure the email profile, enter a 4-digit PIN. After a security PIN is assigned to a profile, the

PIN must be entered on the product control panel before the product can send an email using that

profile.

4. Enter the name or the IP address of the SMTP server and the SMTP server port number. If the outgoing

SMTP server requires additional security authentication, click the check box labeled E-mail Log-in

Authentication and enter the required User ID and Password. Click the Next button when finished.

NOTE: If you do not know the SMTP server name, SMTP port number, or authentication information,

contact the email/Internet service provider or system administrator for the information. SMTP server

names and port names are typically easy to find by doing an Internet search. For example, use terms

like “gmail smtp server name” or “yahoo smtp server name" to search.

5. Review the information and verify all the settings are correct. If there is an error, click the Back button

to correct the error. When finished, click the Save and Test button to test the configuration and finish

the setup.

NOTE: Create additional outgoing email profiles to scan from more than one email account.

Set up the Scan to Email feature via the HP Embedded Web Server (Windows)

1. Open the HP Embedded Web Server (EWS):

ENWW Set up Scan to E-mail 57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Color LaserJet Pro MFP M274 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Color LaserJet Pro MFP M274

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info