Bedienungsanleitung HP Designjet 4000 P-S (Seite 239 von 268) (Englisch)

724472

239

Zoom out

Zoom in

Vorherige Seite

1/268

Nächste Seite

Tell me about paper

● “Tell me about using paper” on page 237

● “Tell me about drying time” on page 238

Tell me about using paper

Choosing the correct paper type for your needs is an essential step in ensuring good

print quality. For best printing results, use only recommended papers (see “How do I

select supported paper types?” on page 94), whose reliability and performance have

been developed and thoroughly tested. All printing components (printer, ink system,

and paper) have been designed to work together to give trouble-free performance and

optimal print quality.

Here are some further tips about paper usage:

● Always keep unused rolls wrapped in the plastic wrap to prevent discoloration.

Rewrap partially used rolls if they are not being used.

● Do not stack rolls.

● Allow all paper types to adapt to room conditions out of the packaging for 24

hours before printing.

● Handle film and glossy paper by the edges or wear cotton gloves. Skin oils can

be transferred to the printing material, leaving fingerprint marks.

● Keep the paper tightly wound on the roll throughout the loading and unloading

procedures. If it starts to unwind, it can become difficult to handle.

● Whenever you load a roll or a sheet, the front panel prompts you to specify the

paper type you are loading. For good print quality, it is essential to specify this

correctly. If paper is already loaded, you can check the paper type at the front

panel by highlighting the

or icon.

● The quality of some images may be reduced if you use a paper type that is

unsuitable for your image.

● If you load a paper type described on the front panel as Super Heavy Coated

Paper (note: currently there are no recommended papers of this type), you

should turn off the cutter to avoid cutter failure. To do this, select the

icon,

then Paper handling options > Cutter > Off.

Whenever you decide to stop using Super Heavy Coated Paper and load a

different paper type, remember to turn the cutter back on.

● Make sure the appropriate print quality setting (Fast, Normal, or Best) is selected.

You can set the print quality from the driver, from the Embedded Web Server, or

from the front panel. Driver or Embedded Web Server settings override front

panel settings. The combination of paper type and print quality settings tells the

printer how to place the ink on the paper—for example, the ink density, halftoning

method, and number of passes of the printheads. See “How do I choose print

quality settings?” on page 130.

● Although the ink systems supplied with this printer have good light-fastness,

colors will eventually fade or change if exposed to sunlight over a long period of

time.

237

Tell me about paper

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Designjet 4000 P-S Seite 239

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Designjet 4000 P-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info