Bedienungsanleitung HP Designjet 4020 (Seite 56 von 235) (Englisch)

724473

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

You can select at what point you want to print a file you have in the queue. From the Web server, select

the Settings tab > Device setup > When to start printing; or, from the front panel, select the

icon

and then Job management options > When to start printing.

There are three options you can select:

●

When After Processing is selected, the printer waits until the whole page has been processed

and then it starts to print. This is the slowest setting but offers the best print quality.

●

When Immediately is selected, the printer prints the page as it is processed. This is the quickest

setting, but the printer may stop halfway through a print to process data. This setting is not

recommended for complex images with dense color.

●

When Optimized is selected (this is the default setting), the printer calculates the best time to begin

printing the page. It is usually the best compromise between the After Processing and

Immediately settings.

Identifying a job in the queue

The best way to look at the queue is in the Embedded Web Server (Information > Job queue) where

you can manage the queue and get full information on every job (by clicking the name of the file).

However, you can also manage the queue from the front panel. To do so, select the

icon and

then Job queue, where you can see a list of the jobs in the queue.

Each has an identifier, comprising:

The job currently being printed is in position 0. The next job to be printed is in position 1, the previous

job already printed is in position -1.

Prioritizing a job in the queue

When using the Embedded Web Server, to make any job in the print queue the next one to be printed,

select it and choose Reprint or if using the front panel select the option: Move to front.

If nesting is turned on, the prioritized job may still be nested with others. If you really want this job to be

printed next, and on its own on the roll, first turn nesting off and then move it to the front of the queue

as described above.

Deleting a job from the queue

Under normal circumstances, there is no need to delete a job from the queue after printing it, as it will

just fall off the end of the queue as more files are sent. However, if you have sent a file in error, and

want to avoid any chance of it being reprinted, you can simply delete it, by selecting it and choosing

Delete (in the Embedded Web Server or in the front panel).

In the same way, you can delete a job that has not been printed yet.

If the job is currently being printed (Status = printing in the Web server, or its queue position is 0 in the

front panel), and you want both to cancel the job and to delete it, first click the Cancel icon in the Web

server, or press the Cancel key on the front panel, and then delete it from the queue.

Making copies of a job in the queue

To make extra copies of any job in the queue, select the job in the Embedded Web Server and click

the Reprint icon, then specify the number of copies you want. The job will be moved to the top of the

queue.

46 Chapter 5 How do I... (print job topics) ENWW

Print job

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Designjet 4020 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Designjet 4020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info