Bedienungsanleitung HP Designjet 4020 (Seite 73 von 235) (Englisch)

724473

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

Autorotate

The HP-GL/2 and HP RTL printer driver provides an Autorotate option in the Paper/Quality tab, which

will automatically rotate by 90 degrees any oversized portrait images in order to save paper.

Print a mirror image

If you are using clear imaging paper, sometimes called backlit, you may want to print a mirror image of

your drawing, so that when the paper is lit from behind it is in the correct orientation. To do this without

changing the image in your application:

●

Using the HP-GL/2 and HP RTL printer driver for Windows: select the Finishing tab, then Mirror

Image.

●

Using the PostScript driver for Windows: select the Advanced tab, then Document Options,

Printer Features and set Mirror Image to On.

●

Using a Mac OS printer driver: select the Finishing panel, then Mirror Image.

●

Using the Embedded Web Server: select the Submit Job page, then Mirror image.

●

Using the front panel: select the

icon, then Default printing options > Paper options > Enable

mirror image.

NOTE: If mirror image is set with the printer driver or with the Embedded Web Server, it overrides the

setting in the front panel.

Scale an image

You can send an image to the printer at a certain size but tell the printer to rescale it to a different size

(normally larger). This may be useful:

●

If your software does not support large formats

●

If your file is too large for the printer's memory—in this case you can reduce the page size in your

software and then scale it up again using the front panel option

You can rescale an image in the following ways:

●

Using a Windows printer driver: select the Effects tab, then Resizing Options.

◦

The Print Document On option adjusts the image size to the page size selected for your

printer. For example, if you have selected ISO A2 as the page size and you print an A4-size

image, it will be enlarged to fit the A2 page. If the ISO A3 page size is selected, the printer

would reduce a larger image to fit the A3 size.

◦

The % of Normal Size (HP-GL/2 and HP RTL driver) or % of Actual Size option (PostScript

driver) enlarges the printable area of the original page by the percentage indicated and adds

the printer margins to make up the output page size.

●

Using a Mac OS printer driver: select the Finishing panel, then Print Document on.

The driver adjusts the image size to the page size selected for your printer.

●

Using the Embedded Web Server: select the Submit Job page, then Resizing.

●

Using the front panel: select the

icon, then Default printing options > Paper options >

Scale.

If you are printing to a single sheet, you must ensure that the image can actually fit onto the page,

otherwise clipping will occur.

ENWW Print a mirror image 63

Image adjustment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Designjet 4020 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Designjet 4020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info