Bedienungsanleitung HP Designjet 4020 (Seite 168 von 235) (Englisch)

724473

168

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

8. In your application, set the color space of the image to emulate the HP Designjet 1000 Printer

series and the specific paper type that you used in that printer. The data sent to the driver must be

already converted to this emulation color space, which is a CMYK color space. See your

application's online help for information on how to do this. In this way, the 4020 series will emulate

the colors that the 1000 series can produce when printing on that paper type.

9. In the PostScript driver for the HP Designjet 4020 Printer series, go to the Color Management

section and set the CMYK input profile to the same HP Designjet 1000 Printer series color space

that you selected in the application (the emulation color space).

NOTE: When trying to emulate another printer you should always use CMYK colors, not RGB.

10. Set the rendering intent to Relative Colorimetric, or to Absolute Colorimetric if you want to emulate

the whiteness of the paper.

11. Print the image on the HP Designjet 4020 Printer series.

Printing via separate HP-GL/2 and HP RTL drivers

The situation is that you are printing on each printer using the HP-GL/2 and HP RTL driver installed for

that printer.

1. Ensure that both printers have been updated to the latest firmware version. See

Update my printer's

firmware on page 116.

2. Ensure that you have the latest printer driver for both printers. You can download the latest drivers

for the HP Designjet 4020 from

http://www.hp.com/go/4020/drivers/.

3. Ensure that Color Calibration is turned on. At the front panel of the HP Designjet 4020 Printer series,

select the

icon, then Printer configuration > Color calibration > On .

4. Load the printers with similar paper types.

5. Ensure that the Paper Type setting on the front panel corresponds to the paper you have loaded.

6. With the HP-GL/2 and HP RTL driver for the HP Designjet 4020 Printer series, select the Color tab,

and select Printer Emulation from the list of color management options. Then choose the

Designjet 1000 series from the list of emulated printers.

7. With the HP-GL/2 and HP RTL driver for the HP Designjet 1000 series, select the Options tab,

then Manual Color > Color Control > Match Screen. You should also select the Paper Size tab,

then Paper Type.

Printing the same HP-GL/2 and HP RTL file

The situation is that you have produced an HP-GL/2 and HP RTL file (also known as a PLT file) using

the HP-GL/2 and HP RTL driver installed for one printer, and you intend to send the same file to both

printers.

1. Ensure that both printers have been updated to the latest firmware version. See

Update my printer's

firmware on page 116.

2. Ensure that Color Calibration is turned on. At the front panel of the HP Designjet 4020 Printer series,

select the

icon, then Printer configuration > Color calibration > On .

3. Load the printers with similar paper types.

158 Chapter 15 The problem is... (print quality topics) ENWW

Print quality problems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Designjet 4020 Seite 168

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Designjet 4020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info