Bedienungsanleitung HP Deskjet 3511 e-All-in-One (Seite 15 von 62) (Englisch)

624033

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Notes

• Genuine HP ink cartridges are designed and tested with HP printers and papers to help you easily produce

great results, time after time.

NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs

required as a result of using a non-HP supply will not be covered under warranty.

If you believe you purchased genuine HP ink cartridges, go to:

www.hp.com/go/anticounterfeit

• Ink level warnings and indicators provide estimates for planning purposes only.

NOTE: When you receive a low-ink warning message, consider having a replacement cartridge

available to avoid possible printing delays. You do not need to replace the cartridges until print quality

becomes unacceptable.

• Software settings selected in the print driver only apply to printing, they do not apply to copying or scanning.

• You can print your document on both sides of the paper, instead of just one side.

NOTE: You can print your document on both sides of the paper, instead of just one side. Click on the

Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu

select Print Even Pages Only. Click OK to print. After the even numbered pages of the document have

been printed, remove the document from the output tray. Reload the paper in the input tray with the

blank side up, and top of page down. Return to the Pages to Print drop-down menu and then select

Print Odd Pages Only. Click OK to print.

• Print using black ink only

NOTE: If you want to print a black and white document using black ink only, click the Advanced

button. From the Print in Grayscale drop-down menu select Black Ink Only, then click the OK button.

Print using the maximum dpi

Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.

See technical specifications for the print resolution of the maximum dpi mode.

Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space.

To print in Maximum dpi mode

1. Make sure you have photo paper loaded in the input tray.

2. On the File menu in your software application, click Print.

3. Make sure the product is the selected printer.

4. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup,

Printer, or Preferences.

5. Click the Paper/Quality tab.

6. In the Media drop-down list, click Photo Paper, Best Quality.

NOTE: Photo Paper, Best Quality must be selected from the Media drop-down list on the Paper/

Quality tab to enable printing in maximum DPI.

7. Click the Advanced button.

8. In the Printer Features area, select Yes from the Print in Max DPI drop-down list.

9. Select Paper Size from Paper/Output drop-down list.

10. Click OK to close the advanced options.

11. Confirm Orientation on Layout tab, then click OK to print.

Print using the maximum dpi 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Deskjet 3511 e-All-in-One Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Deskjet 3511 e-All-in-One

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info