Bedienungsanleitung HP DeskJet Ink Advantage 4670 series (Seite 89 von 137) (Englisch)

705140

Zoom out

Zoom in

Vorherige Seite

1/137

Nächste Seite

After turning on the printer, HP recommends you wait ve minutes before sending or receiving a fax. The

printer cannot send or receive faxes while it is initializing after being turned on.

●

Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall

jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the

printer and the other end to your telephone wall jack, as shown in the illustration.

1 Telephone wall jack

2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port

If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord

to extend the length. You can purchase the cord at an electronics store that carries phone accessories.

●

Try connecting a working phone and phone cord to the telephone wall jack that you are using for the

printer and check for a dial tone. If you do not hear a dial tone, call your local telephone company for

service.

●

Other equipment, which uses the same phone line as the printer, might be in use. For example, you

cannot use the printer for faxing if an extension phone is o the hook, or if you are using a computer

dial-up modem to send an email or access the Internet.

●

Check to see if another process has caused an error. Check the display or your computer for an error

message providing information about the problem and how to solve it. If there is an error, the printer

cannot send or receive a fax until the error condition is resolved.

●

The phone line connection might be noisy. Phone lines with poor sound quality (noise) can cause faxing

problems. Check the sound quality of the phone line by plugging a phone into the telephone wall jack

and listening for static or other noise. If you hear noise, turn Error Correction Mode (ECM) o and try

faxing again. For information about changing ECM, see Send a fax in Error Correction Mode on page 32. If

the problem persists, contact your telephone company.

●

If you are using a digital subscriber line (DSL) service, make sure that you have a DSL lter connected or

you cannot fax successfully. Click here to go online for more information.

●

Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check

if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do

not hear a normal sounding dial tone, it might be a phone line set up for digital phones.

●

If you are using either a private branch exchange (PBX) or an integrated services digital network (ISDN)

converter/terminal adapter, make sure the printer is connected to the correct port and the terminal

adapter is set to the correct switch type for your country/region, if possible. Click here to go online for

more information.

●

If the printer shares the same phone line with a DSL service, the DSL modem might not be grounded

correctly. If the DSL modem is not grounded correctly, it can create noise on the phone line. Phone lines

ENWW Fax issues 83

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP DeskJet Ink Advantage 4670 series Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP DeskJet Ink Advantage 4670 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info