Bedienungsanleitung HP Elite Slice (Seite 14 von 30) (Englisch)

655054

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

●

If you are creating recovery discs, be sure to use high-quality discs. It is normal for the system to reject

defective discs. You will be prompted to insert a new blank disc to try again.

●

The number of discs in the recovery-disc set depends on your computer model (typically 3 to 6 DVDs).

The Recovery Media Creation program tells you the specic number of blank discs needed to make the

set. If you are using a USB ash drive, the program will tell you the size of the drive required to store all

the data (minimum of 8 GB).

NOTE: The process of creating recovery media is lengthy. You can quit the process at any time. The

next time you initiate the process, it resumes where it left o.

NOTE: Do not use media cards for creating recovery media. The system may not be able to boot up from a

media card and you may not be able to run system recovery.

To create recovery discs:

1. Close all open programs.

2. Click the Start button, click All Programs, click Security and Protection, click Recovery Manager, and

then click HP Recovery Media Creation. If prompted, click Yes to allow the program to continue.

3. Click Create recovery media using blank DVD(s), and then click Next.

4. Follow the on-screen instructions. Label each disc after you make it (for example, Recovery 1, Recovery

2), and then store the discs in a secure place.

To create a recovery USB ash drive:

NOTE: You must use a USB ash drive with a capacity of at least 8 GB.

NOTE: Recovery Media Creation formats the USB ash drive, deleting any les on it.

1. Close all open programs.

2. Insert the USB ash drive into a USB port on the computer.

3. Click the Start button, click All Programs, click Security and Protection, click Recovery Manager, and

then click Recovery Media Creation.

4. Click Create recovery media with a USB ash drive, and then click Next.

5. Select the USB ash drive from the list of media. The program will let you know how much storage is

required to create the recovery drive. If the USB ash drive does not have enough storage capacity, it will

appear grayed out, and you must replace it with a larger USB ash drive. Click Next.

6. Follow the on-screen instructions. When the process is complete, label the USB ash drive and store it in

a secure place.

Creating recovery discs with HP Recovery Disc Creator (select models only)

HP Recovery Disc Creator is a software program that oers an alternative way to create recovery discs on

select models. After you successfully set up the computer, you can create recovery discs using HP Recovery

Disc Creator. The recovery discs allow you to reinstall your original operating system as well as select drivers

and applications if the hard drive becomes corrupted. HP Recovery Disc Creator creates two kinds of recovery

discs:

●

Windows 7 operating system DVD—Installs the operating system without additional drivers or

applications.

●

Driver Recovery DVD—Installs specic drivers and applications only, in the same way that the HP

Software Setup utility installs drivers and applications.

8 Chapter 1 Getting Started in Windows 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Elite Slice Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Elite Slice

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info