Bedienungsanleitung HP Elite Slice (Seite 17 von 30) (Englisch)

655054

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

●

If Security and Protection is listed, continue with step 5.

●

If Productivity and Tools is listed, follow the steps in System Recovery when Windows is not

responding on page 11.

5. Click Security and Protection, click Recovery Manager, and then click Recovery Manager. If prompted,

click Yes to allow the program to continue.

6. Under I need help immediately, click System Recovery.

7. Select Yes, and then click Next. Your computer restarts.

8. When the computer restarts, you will see the Recovery Manager welcome screen again. Under I need

help immediately, click System Recovery. If you are prompted to back up your les, and you have not

done so, select Back up your les rst (recommended), and then click Next. Otherwise, select Recover

without backing up your les, and then click Next.

9. System Recovery begins. After System Recovery is complete, click Finish to restart the computer.

10. When Windows has loaded, shut down the computer, reconnect all peripheral devices, and then turn the

computer back on.

System Recovery when Windows is not responding

CAUTION: System Recovery deletes all data and programs you created or installed.

If Windows is not responding, but the computer is working, follow these steps to perform a System Recovery.

1. Turn o the computer. If necessary, press and hold the power button until the computer turns o.

2. Disconnect all peripheral devices from the computer, except the monitor, keyboard, and mouse.

3. Press the power button to turn on the computer.

4. As soon as you see the HP logo screen, repeatedly press the F11 key on your keyboard until the Windows

is Loading Files… message appears on the screen.

5. At the HP Recovery Manager screen, follow the on-screen instructions to continue.

6. When Windows has loaded, shut down the computer, reconnect all peripheral devices, and then turn the

computer back on.

System Recovery using recovery media (select models only)

Use the steps provided in this section if you created recovery media using Creating recovery media using HP

Recovery Manager (select models only) on page 7. If you used HP Recovery Disc Creator to create a Windows 7

operating system DVD and a Driver Recovery DVD, use the steps in Using HP Recovery Disc operating system

discs (select models only) on page 12.

CAUTION: System Recovery deletes all data and programs you have created or installed. Back up any

important data to a CD or DVD or to a USB ash drive.

To perform a System Recovery using recovery media:

1. If you are using a set of DVDs, insert the rst recovery disc into the DVD drive tray, and close the tray. If

you are using a recovery USB ash drive, insert it into a USB port.

2. Click the Start button, and then click Shut Down.

If the computer is not responding, press and hold the power button for approximately 5 seconds or until

the computer turns o.

If you encounter issues 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Elite Slice Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Elite Slice

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info