Bedienungsanleitung HP EliteBook 720 (Seite 93 von 103) (Englisch)

591934

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the

download is complete. If no instructions are displayed, follow these steps:

1. From the Start screen, type explorer, and then select File Explorer.

2. Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

4. Double-click the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

5. Complete the installation by following the on-screen instructions.

NOTE: After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Using Advanced System Diagnostics

Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer

hardware is functioning properly. The following diagnostic tests are available in Advanced System

Diagnostics:

● System Tune-Up—This group of additional tests checks your computer to make sure that the

main components are functioning correctly. System Tune-Up runs longer and more

comprehensive tests on memory modules, hard drive SMART attributes, the hard drive surface,

the battery (and battery calibration), video memory, and the WLAN module status.

●

Start-up test—This test analyzes the main computer components that are required to start the

computer.

●

Run-in test—This test repeats the start-up test and checks for intermittent problems that the

start-up test does not detect.

●

Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all

data in every sector of the hard drive. If the test detects a damaged sector, it attempts to move

the data to a good sector.

●

Memory test—This test analyzes the physical condition of the memory modules. If it reports an

error, replace the memory modules immediately.

●

Battery test—This test analyzes the condition of the battery and calibrates the battery if

necessary. If the battery fails the test, contact HP support to report the issue and purchase a

replacement battery.

● BIOS Management—You can update or rollback the version of the BIOS on the system. Do not

shut down or remove external power during the process. You will be given a confirmation screen

before your BIOS is modified. Select BIOS update, BIOS Rollback, or Back to main menu.

You can view system information and error logs or select languages in the Advanced System

Diagnostics window.

To start Advanced System Diagnostics:

1. Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is

displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed,

press f2.

2. Click the diagnostic test you want to run, and then follow the on-screen instructions.

Using Advanced System Diagnostics 83

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP EliteBook 720 Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info