Bedienungsanleitung HP EliteBook Revolve 810 (Seite 96 von 101) (Englisch)

604794

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

The computer screen is blank

If the screen is blank but you have not turned off the computer, one or more of these settings may be

the cause:

●

The computer may be in the Sleep state. To exit Sleep, briefly press the power button. Sleep is

an energy-saving feature that turns off the display. Sleep can be initiated by the system while the

computer is on but is not in use, or when the computer has reached a low battery level. To

change these and other power settings, right-click the Battery icon on the Windows desktop in

the notification area, at the far right of the taskbar, and then click Preferences.

●

The computer may not be set to display the image on the computer screen. To transfer the

image to the computer screen, press fn+f4. On most models, when an optional external display,

such as a monitor, is connected to the computer, the image can be displayed on the computer

screen or the external display, or on both devices simultaneously. When you press fn+f4

repeatedly, the image alternates among the computer display, one or more external displays,

and simultaneous display on all devices.

Software is functioning abnormally

If the software is unresponsive or responds abnormally, restart the computer by pointing to the right

side of the screen. When the charms display, click Settings. Click the Power icon, and then click

Shut down. If you cannot restart the computer using this procedure, see the next section,

The

computer is on but not responding on page 86.

The computer is on but not responding

If the computer is turned on but is not responding to software or keyboard commands, try the

following emergency shutdown procedures, in the sequence provided, until shutdown occurs:

CAUTION: Emergency shutdown procedures result in the loss of unsaved information.

●

Press and hold the power button for at least 5 seconds.

● Disconnect the computer from external power and remove the battery.

The computer is unusually warm

It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels

unusually warm, it may be overheating because a vent is blocked.

If you suspect that the computer is overheating, allow the computer to cool to room temperature. Be

sure to keep all vents free from obstructions while you are using the computer.

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on

a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft

surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to

contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer

and the AC adapter comply with the user-accessible surface temperature limits defined by the

International Standard for Safety of Information Technology Equipment (IEC 60950).

NOTE: The fan in the computer starts up automatically to cool internal components and prevent

overheating. It is normal for the internal fan to cycle on and off during operation.

86 Appendix B Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP EliteBook Revolve 810 Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info