Bedienungsanleitung HP Envy 13 (Seite 26 von 94) (Englisch)

632229

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

When you set up a WLAN or access an existing WLAN, always enable security features to protect your

network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA)-

Personal and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the

network, other WLAN devices can pick up unprotected signals and either connect to your network

(uninvited) or capture information being sent across it. However, you can take precautions to protect

your WLAN:

●

Use a wireless transmitter with built-in security

Many wireless base stations, gateways, or routers provide built-in security features such as

wireless security protocols and firewalls. With the correct wireless transmitter, you can protect your

network from the most common wireless security risks.

●

Work behind a firewall

A firewall is a barrier that checks both data and requests for data that are sent to your network,

and discards any suspicious items. Firewalls are available in many varieties, both software and

hardware. Some networks use a combination of both types.

●

Use wireless encryption

A variety of sophisticated encryption protocols is available for your WLAN. Find the solution that

works best for your network security:

◦

Wired Equivalent Privacy (WEP) is a wireless security protocol that encodes or encrypts all

network data before it is transmitted using a WEP key. Usually, you can allow the network to

assign the WEP key. Alternatively, you can set up your own key, generate a different key, or

choose other advanced options. Without the correct key, others will not be able to use the

WLAN.

◦

WPA (Wi-Fi Protected Access), like WEP, uses security settings to encrypt and decrypt data

that is transmitted over the network. However, instead of using one static security key for

encryptions as WEP does, WPA uses “temporal key integrity protocol” (TKIP) to dynamically

generate a new key for every packet. It also generates different sets of keys for each computer

on the network.

Connecting to a WLAN

To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on (wireless light is off). If the wireless light is amber, press the

wireless key.

2. Click the network icon in the notification area, at the far right of the taskbar.

3. Select your WLAN from the list.

4. Click Connect.

If the network is a security-enabled WLAN, you are prompted to enter a network security key, which

is a security code. Type the code, and then click OK to complete the connection.

NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.

NOTE: If you do not see the network you want to connect to, click Open Network and Sharing

Center, and then click Set up a new connection or network. A list of options is displayed. You

can choose to manually search for and connect to a network or to create a new network connection.

16 Chapter 3 Wireless and local area network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Envy 13 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Envy 13

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info