Bedienungsanleitung HP ENVY All-in-One - 27-b250nd (Seite 16 von 57) (Englisch)

681564

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Connecting to a WLAN

NOTE: When you are setting up Internet access in your home, you must establish an account with an

Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will

help set up the modem, install a network cable to connect your wireless router to the modem, and test the

Internet service.

To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on.

2. On the taskbar, right-click the network status icon, and then connect to one of the available networks.

If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and

then select Next to complete the connection.

NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.

NOTE: If you do not see the WLAN you want to connect to:

1. On the taskbar, right-click the network status icon, and then select Open Network & Internet

Settings.

‒ or –

On the taskbar, select the network status icon, and then select Network & Internet Settings.

2. Under the Network & Internet Status section, select Network and Sharing Center.

3. Select Set up a new connection or network.

A list of options is displayed, allowing you to manually search for and connect to a network or to

create a new network connection.

3. Follow the on-screen instructions to complete the connection.

After the connection is made, right-click the network status icon at the far right of the taskbar, to verify the

name and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router

manufacturer, and interference from other electronic devices or structural barriers such as walls and oors.

Using HP Mobile Broadband (select products only)

Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer,

when used with a mobile operator’s network, gives you the freedom to connect to the Internet, send e-mail,

or connect to your corporate network without the need for Wi-Fi hotspots.

You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband

service. The number may be printed on a label located on the bottom of your computer, inside the battery bay,

under the service door, or on the back of the display.

‒ or –

1. On the taskbar, select the network status icon.

2. Select Network & Internet Settings.

3. Under the Network & Internet section, select Cellular, and then select Advanced Options.

Some mobile network operators require the use of a subscriber identity module (SIM) card. A SIM card

contains basic information about you, such as a personal identication number (PIN), as well as network

information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it may

8 Chapter 3 Connecting to a network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP ENVY All-in-One - 27-b250nd Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP ENVY All-in-One - 27-b250nd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info