Bedienungsanleitung HP INKJET1000 (Seite 59 von 96) (Englisch)

20132

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Maintaining and troubleshooting56

Troubleshooting installation issues

If you had trouble installing the printer, check these items.

Hardware installation issues

• Make sure the power supply cord is connected securely to the printer. Make sure that the power cord is

connect securely between the power supply and a working power outlet.

• Make sure that all packing tape has been removed from the outside and inside the printer.

• Make sure that the rear-access panel or the optional auto-duplex unit has been installed. The printer

cannot work properly without the rear-access panel or the optional auto-duplex unit installed.

• Make sure that all of the printheads and ink cartridges are installed.

• Make sure the printheads and ink cartridges are installed properly. The printer cannot work if they are

not installed.

• Make sure that you have removed the protective tape from the printheads.

• Make sure that all of the printheads are in their correct, color-coded slot.

• Make sure that all of the ink cartridges are in their correct, color-coded slot.

• Make sure that all of the printheads and ink cartridges are firmly installed into their slots.

Press down firmly on each one to ensure proper contact.

• Make sure that the printhead latch is closed properly.

• Make sure that the printer is loaded with paper.

• Make sure no lights are on or blinking except the Power light, which should be on. If any other lights

are on, see Printer lights reference to interpret the light pattern.

• Make sure that the printer can print a printer configuration page. Press and hold down the

(powerbutton). While holding down the (power button), press the (cancel button) one time.

Release the (power button). The printer configuration page should print.

• Make sure that any printer cable you are using is in good working order and that it is securely

connected between the appropriate connector on the printer and the computer or a network

connection.

Software installation issues

• Make sure your computer is running one of these operating systems: Windows 98, Windows 2000,

Windows Me or Windows XP. If you are using a Macintosh computer, it must be running Mac OS 9.2

or later.

• Make sure the computer meets at least the minimum system requirements listed here.

• Minimum

Windows 98: Pentium

90 MHz, 16 MB RAM, 60 MB hard disk space

Windows NT 4.0*: Pentium 100 MHz, 32 MB RAM, 60 MB hard disk space

Windows Me: Pentium 150 MHz, 32 MB RAM, 60 MB hard disk space

Windows 2000: Pentium 300 MHz, 64 MB RAM, 60 MB hard disk space

Windows XP, 32 bit: Pentium 233 MHz, 64 MB RAM, 60 MB hard disk space

Mac OS X (10.1 or later): 32 MB RAM

To view the CHM file (Windows), you must be running Internet Explorer 4.0 or later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP INKJET1000 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP INKJET1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info