296338
52
Zoom out
Zoom in
Vorherige Seite
1/204
Nächste Seite
Automatically Connecting to a Wi-Fi Network
When you connect to a Wi-Fi network, the HP iPAQ automatically detects Wi-Fi networks that are
broadcasting their signal. If your Wi-Fi network isn't set to broadcast, then you have to connect to it
manually. Before trying to connect to a Wi-Fi network, determine if authentication information is needed
by contacting your network administrator.
1.
Tap the iPAQ Wireless icon
.
2. Tap the Wi-Fi icon to turn Wi-Fi on.
3. Once the HP iPAQ detects a Wi-Fi network, you are asked to choose if you want to connect. Select
the network you want to connect to and tap Connect.
Manually Connecting to a Wi-Fi Network
A wireless network can be added manually by entering the settings information to add the network.
Before trying to connect to a Wi-Fi network, determine if authentication information is needed by
contacting your network administrator.
1.
Tap the iPAQ Wireless icon
.
2. Tap the Wi-Fi icon to turn Wi-Fi on.
3. Tap Start > Settings > Connections tab > Network Cards > Wireless tab > Add New.
4. Enter the Network name.
5. Choose a connection method. Select "The Internet" to connect to the Internet through an Internet
Service Provider (ISP) or select "Work" to connect to a company network. You should only choose
"Work" if the network requires a proxy server.
6. Tap the Network Key tab.
To use authentication, and select the authentication method from the Authentication list.
To use data encryption, select an encryption method from the Data encryption list.
To automatically use a network key, tap The key is automatically provided. Otherwise, enter
the network key.
NOTE To delete a connection, tap Start > Settings > Connections tab > Network Cards
> Wireless tab. Tap and hold the connection you want to remove, and then tap Remove
Settings.
Finding an IP Address
1.
Tap the iPAQ Wireless icon
.
2. Tap the Wi-Fi icon to turn Wi-Fi on.
3. Connect to a network automatically or manually by tapping Start > Settings > Connections tab
> Network Cards > Wireless tab.
44 Chapter 3 Connections ENWW
Downloaded from www.Manualslib.com manuals search engine
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP ipaq hw6910 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info