Bedienungsanleitung HP LaserJet 3300mfp (Seite 91 von 259) (Englisch)

669092

Zoom out

Zoom in

Vorherige Seite

1/259

Nächste Seite

EN Managing group-dial codes 89

4 Enter a name for the fax number. To do so, repeatedly press the numeric button for the letter

you need until the letter appears. (See Using dialing characters

for a list of characters.)

5 Press menu/enter to save the information.

To program a one-touch key for alternate long distance

If you use an alternate long distance carrier, you can program a one-touch key to dial the service’s

access number before a fax number. When you need to use this one-touch key, press it, enter the

fax number, and press fax/send. Both the access number and the fax number are then dialed

together. If the access number is used almost every time you dial a fax, it might be easier to

program the access number as a dialing prefix (see Inserting a dial prefix

for more information).

Note Speed-dial codes, one-touch keys, and group-dial codes are more easily programmed from the

software (not available in Windows 95). For instructions on programming speed-dial codes,

one-touch keys, and group-dial codes using the product software, see the product software Help.

Use this procedure if the access number has more than 10 characters or if you only occasionally

use the access number.

1 Follow steps 1 through 6 of To program speed-dial codes and one-touch keys

. When entering

the fax number, you might also have to do one or both of the following tasks:

• If you have to wait for an access tone at some point in the number, enter one or more

three-second pauses by pressing pause/redial.

• Enter a personal identification number (PIN), if applicable.

2 When you are finished entering the access number, press pause/redial. A pause at the end of

the string tells the product not to dial this number until you dial the fax number.

3 Continue with steps 7 through 10 of To program speed-dial codes and one-touch keys

Managing group-dial codes

If you send information to the same group of people on a regular basis, you can program a

group-dial code to simplify the task. Any available speed-dial codes can be programmed with

group-dial codes. Group-dial codes using numbers 1 through 9 are also associated with the

corresponding one-touch key on the control panel. Any individual can be added to a group. All

group members must have programmed speed-dial codes or one-touch keys assigned to them

before being added to the group-dial code.

Use these instructions to manage your group-dial codes:

To program group-dial codes

To delete group-dial codes

To delete an individual from a group-dial code

Note Speed-dial codes, one-touch keys, and group-dial codes are more easily programmed from the

software (not available in Windows 95). For instructions on programming speed-dial codes,

one-touch keys, and group-dial codes using the product software see the product software Help.

To program group-dial codes

1 Assign a speed-dial code to each fax number you want in the group. (For instructions, see To

program speed-dial codes and one-touch keys.)

2 Press menu/enter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LaserJet 3300mfp Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP LaserJet 3300mfp

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info