Bedienungsanleitung HP LaserJet Pro M13 (Seite 1 von 32) (Alle Sprachen)

682133

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Dansk ............. 13

Català ............. 11

Español ............. 9

Italiano ............. 7

Deutsch ............. 5

Français ............ 3

English .............. 1

Norsk .............. 25

Lietuvių .......... 23

Latviešu .......... 21

Suomi ............. 19

Eesti ............... 17

Nederlands ...... 15

Svenska .......... 29

Português ....... 27

Windows

1. For Windows 7 or earlier, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Directly connect

this computer using a USB cable.

Mac

1. Connect the USB cable between the computer and the printer before

installing the software.

2. Continue to “6. Locate or download the software installation les.”

Perform a wireless installation

(M12w wireless models only)

Before starting the installation, verify that the wireless access point is working

correctly. Make sure that the printer, router, and computer are all turned on

and that the computer is connected to the same wireless network that the

printer will be connected to.

If there is not a solid blue light on the top of the printer, go to Process A.

If there is a solid blue light on the top of the printer, go to Process B.

Process A

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Congure to print over

the Wireless Network.

2. Follow the on-screen instructions.

Process B

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Connect to a congured

Wireless Network printer.

2. Follow the on-0screen instructions.

3. Select the printer detected by the software. If the printer cannot be

detected by the installer, manually input the printer’s IP address to

continue the installation.

NOTE: Print a conguration page to nd the printer’s IP address. At the

printer control panel, press and hold the Cancel

button for 5 seconds,

and then release the Cancel

button to print the conguration page. The

IP address is listed on the conguration page in the Network Information

section.

Manually congure the IP address

See the printer user guide for information on how to manually congure the IP

address www.hp.com/support/ljm11-m13.

IMPORTANT:

First, follow

Steps 1 - 3

on the printer hardware

setup poster, then continue

with Step 4.

www.hp.com/support/ljm11-m13 www.register.hp.com

LaserJet Pro M11-M13 series

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

Set up the Control Panel

At the printer control panel, check the LED status before beginning software installation.

5. Select a connection method

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LaserJet Pro M13 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP LaserJet Pro M13

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info