Bedienungsanleitung HP LaserJet Pro MFP M128 (Seite 66 von 124) (Englisch)

682131

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

HP Device Toolbox (Windows)

Use the HP Device Toolbox for Windows to check product status or to view or change product settings from

your computer. This tool opens the HP Embedded Web Server for the product.

NOTE: This tool is available only if you performed a full installation when you installed the product.

Depending on how the product is connected, some features might not be available.

1. Click the Start button, and then click the Programs item.

2. Click your HP product group, and then click the HP Device Toolbox item.

Tab or section Description

Home tab

Provides product, status, and

conguration information.

●

Device Status: Shows the product status and shows the approximate percent life

remaining of HP supplies.

●

Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual

supply life remaining can vary. Consider having a replacement supply available to install

when print quality is no longer acceptable. The supply does not need to be replaced

unless the print quality is no longer acceptable.

●

Device Conguration: Shows the information found on the product conguration page.

●

Network Summary: Shows the information found on the product network conguration

page.

●

Reports: Print the conguration and supplies status pages that the product generates.

●

Event Log: Shows a list of all product events and errors.

System tab

Provides the ability to congure the

product from your computer.

●

Device Information: Provides basic product and company information.

●

Paper Setup: Change the default paper-handling settings for the product.

●

Print Quality: Change the default print-quality settings for the product.

●

EcoSMART Console: Change the default times for entering Sleep mode or Auto Power

Down mode. Congure which events cause the product to wake.

●

Paper Types: Congure print modes that correspond to the paper types that the product

accepts.

●

System Setup: Change the system defaults for the product.

●

Service: Perform the cleaning procedure on the product.

●

Save and Restore: Save the current settings for the product to a le on the computer. Use

this le to load the same settings onto another product or to restore these settings to

this product at a later time.

●

Administration: Set or change the product password. Enable or disable product features.

NOTE: The System tab can be password-protected. If this product is on a network, always

consult with the administrator before changing settings on this tab.

Print tab

Provides the ability to change default

print settings from your computer.

Printing: Change the default product print settings, such as number of copies and paper

orientation. These are the same options that are available on the control panel.

56 Chapter 7 Manage the product ENWW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LaserJet Pro MFP M128 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP LaserJet Pro MFP M128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info