Bedienungsanleitung HP LASERJET4350 (Seite 58 von 304) (Englisch)

20200

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

To print by type and size of paper

1. Be sure to load the trays correctly. See Loading trays.)

2. At the printer control panel, open the PAPER HANDLING menu. Select the paper type

for each tray. If you are unsure which type you are loading, such as bond or recycled,

check the label on the media package.

3. Select the paper-size settings at the printer control panel.

● Tray 1: Set the paper size on the PAPER HANDLING menu if the printer is set to

TRAY 1 TYPE= a type other than ANY. If custom paper is loaded, also set the

custom-paper size on the PAPER HANDLING menu. For more information, see

Printing on small sizes, custom sizes, or heavy paper.

● Tray 2 and optional 500-sheet trays: Standard paper sizes are automatically

detected if the media is loaded correctly in the tray and the guides are adjusted

correctly. See

Loading trays for information about tray adjustments. If custom paper

is loaded, set the knob in the tray to "Custom" and set the custom-paper size on the

PAPER HANDLING menu. For more information, see

Printing on small sizes,

custom sizes, or heavy paper.

● Optional 1,500-sheet tray: Standard paper sizes are automatically detected if the

media is loaded in the tray correctly and the guides are adjusted correctly. See

Loading trays for information about tray adjustments. Custom-size media is not

supported.

●

Optional envelope feeder: Set the size on the PAPER HANDLING menu.

4. In the program or printer driver, select a type other than Auto Select.

NOTE

The type and size settings can also be configured in the HP Web Jetadmin software for

networked printers.

Manually feeding media from tray 1

The manual feed feature is another way of printing on special media from tray 1. Setting

MANUAL FEED to ON either in the printer driver or at the printer control panel stops the

printer after each job is sent, allowing you time to load special paper or other print media in

tray 1. Press

ELECT

button) to continue printing.

If tray 1 contains media when you send the print job, and the printer control panel has

TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY as the default configuration for tray 1

operation, the printer will not stop and wait for media to be loaded. To have the printer wait,

set TRAY 1 TYPE and TRAY 1 SIZE to types other than ANY on the PAPER HANDLING

menu.

NOTE

If the SIZE and TYPE are set to ANY, and MANUAL FEED PROMPT is set to UNLESS

LOADED, then the media will be pulled from tray 1 without prompting. If MANUAL FEED

PROMPT is set to ALWAYS, then the printer will prompt you to load media, even if tray 1 is

set to TYPE=ANY and SIZE=ANY.

If you have selected MANUAL FEED=ON at the printer control panel, this setting will

override the printer driver, and all print jobs that you send to the printer will request manually

fed paper in tray 1 unless a specific tray has been selected in the printer driver. If this feature

is to be used only occasionally, it is best to set MANUAL FEED=OFF at the printer control

panel and to select the manual feed option in the printer driver on a job-by-job basis.

46 Chapter 2 Printing tasks ENWW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LASERJET4350 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info