20200
79
Zoom out
Zoom in
Vorherige Seite
1/304
Nächste Seite
Printing on paper that has a special finish
Some paper has a special finish, such as laid paper, bond paper, and cockled paper. These
types of paper can cause issues in regard to toner adhesion and print quality. Follow these
guidelines when printing on paper that has a special finish.
At the printer control panel, open the CONFIGURE DEVICE menu. On the PRINT
QUALITY submenu, select FUSER MODES, and then select the paper type that you are
using (such as BOND). Set the fuser mode to HIGH 1 or HIGH 2. HIGH 2 provides
better toner adhesion and optimal print quality for paper that has a highly textured finish.
Open the PAPER HANDLING menu and set TRAY TYPE to the type of paper that you
are using (such as BOND) to turn on the appropriate fuser mode.
NOTE
The printer might print at a slower speed when set at HIGH 1 or HIGH 2. Use the HIGH 1
and HIGH 2 settings only if you are experiencing toner-adhesion problems. The HIGH 1 and
HIGH 2 settings might increase problems with curl and jams.
Some makers of these types of paper are now coating one side of the paper to enhance
toner adhesion and print quality. To take advantage of this feature, make sure to load
the paper correctly. The side on which you can read the watermark correctly is the front
side, or the side to be printed on.
For tray 1, load paper with the front side facing up, and the top, short edge toward the printer.
For tray 2, optional 500-sheet trays, and the optional 1,500-sheet tray, load paper with the
front side facing down, and the top, short edge toward you.
ENWW Printing on special media 67
79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP LASERJET4350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info