20200
140
Zoom out
Zoom in
Vorherige Seite
1/304
Nächste Seite
Solving general printing problems
In addition to the issues and solutions that are listed in this section, see Troubleshooting
common Macintosh problems if you are using a Macintosh computer, and see
Troubleshooting common PostScript problems if you are using the PS driver.
Printer selects media from the wrong tray.
Cause
Solution
The tray selection in the software program might
be incorrect.
For many software programs, the paper tray
selection is found on the Page Setup menu
within the program.
Remove any media in other trays to make the
printer select from the correct tray.
For Macintosh computers, use the HP LaserJet
Utility to change the priority of the tray.
The configured size does not match the size of
the media that is loaded in the tray.
Through the control panel, change the
configured size to match the size of the media
that is loaded in the tray.
Printer does not pull paper from tray.
Cause
Solution
The tray is empty. Load paper in the tray.
The paper guides are set incorrectly. To set the guides correctly, see Loading trays.
For the 500-sheet paper tray, make sure that the
leading edge of the paper stack is even. An
uneven edge can prevent the lift plate from rising.
Paper curls when it exits the printer.
Cause
Solution
The paper curls when it exits to the top output bin. Open the rear output bin to allow the paper to
exit in a straight path through the printer.
Turn over the paper that you are printing on.
Reduce the fusing temperature to reduce the
curling. (See
Selecting the correct fuser mode.)
First sheet of media jams in the print-cartridge area.
Cause
Solution
A combination of high humidity and high
temperature is affecting the media.
Adjust the printer for high humidity and high
temperature conditions.
128 Chapter 4 Problem solving ENWW
140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP LASERJET4350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info