Bedienungsanleitung HP LASERJET4PLUS (Seite 17 von 58) (Englisch)

20204

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

2 Guidelines for using media 11

Using envelopes

CAUTION Early models of the HP color LaserJet printer and HP color LaserJet 5 printers do not

support envelopes. Printing on envelopes can damage the printer. See the user guide that

came with your printer for detailed instructions about printing on envelopes.

Most HP LaserJet printers can print on many sizes and styles of envelopes by using the

manual feed feature, an optional envelope tray, an optional envelope feeder, or another

tray. Whichever input method you use, envelopes should meet all of the specifications that

are discussed in this document. Your envelope vendor should provide you with a

satisfactory envelope that complies with the specifications listed in “Guidelines for using

envelopes” on page 13. However, inconsistencies in folds or other process-control

problems can result in some envelopes feeding well and others jamming. Purchase

envelopes that have the quality and consistency that your printer requires.

Note Envelopes can meet the general specifications listed in “Guidelines for using envelopes”

on page 13 and still not print satisfactorily because of the printing environment or other

variables over which HP has no control.

CAUTION Envelopes containing windows, clasps, or snaps can cause severe damage to the printer.

See the support documentation for your printer before using envelopes in your HP LaserJet

printer.

Envelope construction

Because of their construction, some envelopes do not feed through the printer

dependably. Observe the following guidelines when purchasing and using envelopes:

● Make sure that the envelope’s leading edge, which enters the printer first, is straight,

with a sharp, well-creased fold that has no more than two thicknesses of paper.

Envelopes that exceed 90-g/m

(24-lb) basis weight can cause jamming.

● Avoid using flimsy envelopes that have thick or curved leading edges; they will not

feed reliably.

● Envelopes should lie flat and should not be wrinkled, nicked, or otherwise damaged.

● Avoid envelopes that have baggy construction; they might wrinkle while passing

through the printer’s fuser area.

● Make sure that the adhesive labels and all other materials used on envelopes will not

scorch, melt, offset, or release undesirable emissions when heated to 205° C (401° F)

for 0.1 second (0.2 second for HP color LaserJet printers).

● Avoid using envelopes that have encapsulated adhesives that do not require

moistening but instead use pressure for sealing.

● Do not use envelopes that have clasps, snaps, tie strings, transparent windows, holes,

perforations, or cutouts.

● Do not use envelopes that have any adhesive surfaces exposed to the printer.

● Use of envelopes that have woven or smooth finishes is recommended to ensure good

toner adhesion.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LASERJET4PLUS Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info