Bedienungsanleitung HP Officejet Pro 8218 (Seite 38 von 95) (Englisch)

682186

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

Ink tips

● If the print quality is not acceptable, see Printing issues for more information.

● Use Original HP cartridges.

Original HP cartridges are designed and tested with HP printers and papers to help you easily produce

great results, time after time.

NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs

required as a result of using a non-HP supply will not be covered under warranty.

If you believe you purchased Original HP cartridges, go to www.hp.com/go/anticounterfeit.

● Install both the black and color cartridges correctly.

For more information, see Replace the cartridges.

● Check the estimated ink levels in the cartridges to make sure there is suicient ink.

Ink level warnings and indicators provide estimates for planning purposes only.

For more information, see Check the estimated ink levels.

NOTE: When you receive a low-ink warning message, consider having a replacement cartridge

available to avoid possible printing delays. You do not need to replace the cartridges until print quality

becomes unacceptable.

● Always turn o the printer with (the Power button) to allow the printer to protect the nozzles.

Paper loading tips

For more information, also see Load paper.

● Ensure the paper is loaded in the input tray properly, and set the correct media size and media type.

Upon loading paper in input tray, you will be prompted to set the media size and media type.

● Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type

to avoid a paper jam.

● Load paper with the print-side down.

● Ensure that paper loaded in the input tray lays at and the edges are not bent or torn.

● Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the guides do

not bend the paper in the tray.

● Ensure that the input tray is fully inserted into the printer before you start printing.

Printer settings tips (Windows)

● To change default print settings, click Print , and then click Set Preferences in the HP printer software.

To open the HP printer software, see Open the HP printer software (Windows) for more information.

● To select the number of pages to print per sheet, on the Finishing tab of the printer driver, select the

appropriate option from the Pages per sheet drop-down list.

● If you want to change the page orientation, on the Finishing tab of the printer driver, select the

appropriate option from the Orientation area.

● You can use printing shortcut to save time setting printing preferences. A printing shortcut stores the

setting values that are appropriate for a particular kind of job, so that you can set all the options with a

single click.

32 Chapter 3 Print ENWW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Officejet Pro 8218 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Officejet Pro 8218

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info