584662
95
Zoom out
Zoom in
Vorherige Seite
1/268
Nächste Seite
5. A message appears stating that this setting should not be changed unless you have multiple
numbers on the same telephone line. Touch Yes to continue.
6. Do one of the following:
Touch the ring pattern assigned by your telephone company to fax calls.
- Or -
Touch Ring Pattern Detection, and then follow the instructions on the printer control panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the
feature before it finishes, the ring pattern is automatically set to the default, which is All Rings.
NOTE: If you are using a PBX phone system that has different ring patterns for internal and
external calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not
change the setting unless you know that your phone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup, and then touch Basic Fax Setup.
3. Touch Dial Type.
4. Touch to select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was
busy, the printer attempts to redial based on the settings for the busy-redial and no-answer-redial
options. Use the following procedure to turn the options on or off.
Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal.
The factory-set default for this option is On.
No answer redial: If this option is turned on, the printer redials automatically if the receiving fax
machine does not answer. The factory-set default for this option is Off.
To set the redial options
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch Busy Redial or No Answer Redial, and then select the appropriate options.
Set the fax speed
You can set the fax speed used to communicate between your printer and other fax machines when
sending and receiving faxes.
If you use one of the following, setting the fax speed to a slower speed might be required:
ENWW Change fax settings 79
95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hp-officejet-pro-8630

Suche zurücksetzen

  • Hat der HP Officejet Pro 6830 Drucker / Fax , eine Faxweiche, die erkennt ob ein Anruf oder ein Fax reinkommt
    un dementsprechend reagiert. Eingereicht am 2-1-2020 13:24

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP Officejet Pro 8630 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von HP Officejet Pro 8630

HP Officejet Pro 8630 Bedienungsanleitung - Deutsch - 286 seiten

HP Officejet Pro 8630 Bedienungsanleitung - Holländisch - 276 seiten

HP Officejet Pro 8630 Kurzanleitung - Alle Sprachen - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info