584662
123
Zoom out
Zoom in
Vorherige Seite
1/268
Nächste Seite
If you are already using the printer with a different type of connection, such as a USB connection,
follow the instructions in
Change the connection type on page 107 to set up the printer on your
wireless network.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer or to a
network, you can use the software to change the connection type (for example, from a USB
connection to a wireless connection).
NOTE: If you are changing to a wireless connection, make sure that an Ethernet cable has not been
connected to the printer. Connecting an Ethernet cable turns off the wireless capability of the printer.
Also, you might be prompted to temporarily connect a USB cable during the setup process.
To change the connection type, do one of the following:
Change from an Ethernet connection to a wireless connection
Change from a USB connection to a wireless connection
Change from an Ethernet connection to a wireless connection
NOTE: Check the prerequisites before you begin. For more information, see Before you begin
on page 106.
To change from an Ethernet connection to a wireless connection (Windows)
1. Remove the Ethernet cable from the printer.
2. Open the printer software after the installation. For more information, see
Open the HP printer
software (Windows) on page 37.
Run the Wireless Setup Wizard to make the wireless connection. For more information, see
Set
up the printer on your wireless network on page 106.
To change from an Ethernet connection to a wireless connection (OS X)
Before you proceed, go through the list at
Before you begin on page 106.
1. Connect the printer to your wireless network.
2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to wireless for this printer.
Change from a USB connection to a wireless connection
NOTE: Check the prerequisites before you begin. For more information, see Before you begin
on page 106.
To change from a USB connection to a wireless network (Windows)
1. Depending on your operating system, do one of the following:
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
select the printer name, and then click Utilities.
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder of your printer.
2. Click Printer Setup & Software.
3. Select Convert a USB connected printer to wireless. Follow the on-screen instructions.
ENWW Set up the printer for wireless communication 107
123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hp-officejet-pro-8630

Suche zurücksetzen

  • Hat der HP Officejet Pro 6830 Drucker / Fax , eine Faxweiche, die erkennt ob ein Anruf oder ein Fax reinkommt
    un dementsprechend reagiert. Eingereicht am 2-1-2020 13:24

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP Officejet Pro 8630 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von HP Officejet Pro 8630

HP Officejet Pro 8630 Bedienungsanleitung - Deutsch - 286 seiten

HP Officejet Pro 8630 Bedienungsanleitung - Holländisch - 276 seiten

HP Officejet Pro 8630 Kurzanleitung - Alle Sprachen - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info