Bedienungsanleitung HP OfficeJet Pro 8712 (Seite 72 von 171) (Englisch)

682182

Zoom out

Zoom in

Vorherige Seite

1/171

Nächste Seite

Set the answer mode (Auto answer)

The answer mode determines whether the printer answers incoming calls.

● Turn on the Auto Answer setting if you want the printer to answer faxes automatically. The printer

answers all incoming calls and faxes.

● Turn o the Auto Answer setting if you want to receive faxes manually. You must be available to

respond in person to the incoming fax call or else the printer does not receive faxes.

To set the answer mode

1. From the printer control panel display, touch Fax .

2. Touch Setup , and then touch Preferences .

3. Touch Auto Answer to turn it on or o.

You may also access this feature by pressing (the Fax Status button) on the Home screen.

Set the number of rings before answering

If you turn on the Auto Answer setting, you can specify how many rings occur before incoming calls are

automatically answered.

The Rings to Answer setting is important if you have an answering machine on the same phone line as the

printer, because you want the answering machine to answer the phone before the printer does. The number

of rings to answer for the printer should be greater than the number of rings to answer for the answering

machine.

For example, set your answering machine to a low number of rings and the printer to answer in the maximum

number of rings. (The maximum number of rings varies by country/region.) In this setup, the answering

machine answers the call and the printer monitors the line. If the printer detects fax tones, it receives the fax.

If the call is a voice call, the answering machine records the incoming message.

To set the number of rings before answering

1. From the printer control panel display, touch Fax .

2. Touch Setup , and then touch Preferences .

3. Touch Rings to Answer .

4. Touch to set the number of rings.

5. Touch Done .

Change the answer ring pattern for distinctive ring

Many phone companies oer a distinctive ring feature that allows you to have several phone numbers on one

phone line. When you subscribe to this service, each number is assigned a dierent ring pattern. You can set

up the printer to answer incoming calls that have a specic ring pattern.

If you connect the printer to a line with distinctive ring, have your telephone company assign one ring pattern

to voice calls and another ring pattern to fax calls. HP recommends that you request double or triple rings for

a fax number. When the printer detects the specied ring pattern, it answers the call and receives the fax.

TIP: You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive ring.

With this feature, the printer recognizes and records the ring pattern of an incoming call and, based on this

call, automatically determines the distinctive ring pattern assigned by your telephone company to fax calls.

62 Chapter 5 Fax ENWW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP OfficeJet Pro 8712 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP OfficeJet Pro 8712

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info