Bedienungsanleitung HP OMEN 15-ax239 (Seite 25 von 66) (Englisch)

655060

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Connecting to a WLAN

NOTE: When you are setting up Internet access in your home, you must establish an account with an

Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help

set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet

service.

To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on.

2. Select the network status icon in the taskbar, and then connect to one of the available networks.

If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and

then select Next to complete the connection.

NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.

NOTE: If you do not see the WLAN you want to connect to, right-click the network status icon in the

taskbar, and then select Open Network and Sharing Center. Select Set up a new connection or

network. A list of options is displayed, allowing you to manually search for and connect to a network or

to create a new network connection.

3. Follow the on-screen instructions to complete the connection.

After the connection is made, select the network status icon at the far right of the taskbar, to verify the name

and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router

manufacturer, and interference from other electronic devices or structural barriers such as walls and oors.

Using HP Mobile Broadband (select products only)

Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer,

when used with a mobile operator’s network, gives you the freedom to connect to the Internet, send e-mail,

or connect to your corporate network without the need for Wi-Fi hotspots.

You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband

service. The number may be printed on a label located on the bottom of your computer, inside the battery

bay, under the service door, or on the back of the display.

– or –

You can nd the number following these steps:

1. From the taskbar, select the network status icon.

2. Select View Connection Settings.

3. Under the Mobile broadband section, select the network status icon.

Some mobile network operators require the use of a subscriber identity module (SIM) card. A SIM card

contains basic information about you, such as a personal identication number (PIN), as well as network

information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it may

be included with the HP Mobile Broadband documents provided with your computer, or the mobile network

operator may provide it separately from the computer.

For information about HP Mobile Broadband and how to activate service with a preferred mobile network

operator, see the HP Mobile Broadband information included with your computer.

Connecting to a wireless network 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP OMEN 15-ax239 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP OMEN 15-ax239

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info